Harness Extension, Headlights, RC36-2, RC30 Style
€32.25
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYWH-0007
SKU: hon-11483 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSilencer, Stainless, Oval, Carbon End Cap, Ninja 400, Assy
€292.66
Silencer, Stainless, Oval, Carbon End Cap, Ninja 400, Assy
Silencer with 43 mm. inside diameter. Please note this is a replacement for the 2018- Ninja 250/300 slip on system ( EXPS-0101)
TYGA no: EXSL-0072
SKU: kaw-10092 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Kawasaki, Ninja 400R 2018-Sub frame aluminium GP-T, Honda NSR250 MC21/MC28
€196.44
Subframe, Aluminium, NSR250 MC21/28 GP-T
This lightweight aluminium subframe weighs less than 1.2 kg and replaces the stock item when used as part of the NSR250 GP-T seat kit. Essential for mounting the seat cowl, this component is supplied with all brackets and mounting points to substitute this for the OEM Honda item. Composed of extrusions and CNC machined sections, handwelded together by craftsman, this subframe is then blasted and anodized for a tough and attractive finish. Supplied with a regulator/rectifier stay as well as cable ties for securing the wiring.
Compatible Parts:
Use with seat cowling kits
BPFS-0128, 0129, 0130, 0131, 0132, 0133, 0134, 0135 and 0136
TYGA no: TYLY-0108
SKU: hon-10458 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon front fender “stock shape, Honda RS250 NX4-NX5
€207.17
Front fender stock shape, Honda RS250 NX4-NX5
Same shape as original
Compatible Parts:
All Tyga Performance and Honda OEM panels.
TYGA no: BPCF-0006
SKU: hon-11292 Categories: ALL products, Bodywork and carbon, Honda, RS250R NF5 / NX5, ShopUpper cowling (GRP) NX6, NSR500V
€299.78
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Rear axle Wheel, MSX/ Monkey
€20.41
Rear axle Wheel, MSX/ Monkey
TYGA no: 42301-K26-900
SKU: msx-10252 Categories: ALL products, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, OEM parts, OEM parts, Shop, Various parts, Various parts, Various partsTop End Rebuild Kit MC18, Cyl. B, Assy.
€293.88
Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘B’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0002B
SKU: hon-10837 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC18Seat cowling assy, Honda NSR250 MC21 GP500
€208.99
TYGA Tail. This is now wider, more aggressively profiled and lighter than before. It is compatible for both the MC21/28 models. It retains use of the Honda subframe and seat pad and only needs the tail light to complete the conversion.
TYGA no: BPFT-9011Â
SKU: hon-10230 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, NSR250 MC21, Shop