Exhaustset stainless steel alum. silencer round, Kawasaki ZXR250
€506.31
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round aluminium silencer EXSL-0033
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.HP Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifolds<iframe width= 560 height= 315 src= https://www.youtube.com/embed/z5hGKrpQ56c frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0018
SKU: kaw-10018 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopHeadlight, KTM RC125/200/250/390
€351.15
Headlight, KTM RC125/200/250/390
Replacement Headlight, TYGA Eyes for use on KTM series Upper Cowling BPFU-7231(p) and BPCY-7231(p)
TYGA no: BPLT-0028
SKU: ktm-10104 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, RC 125/200, RC 390VHM blind insert, Suzuki RGV250 / Aprilia RS250
€52.95
VHM blind inserts, RGV250 / RS250 (alg-10093)VHM Blind Insert for the RGV250/RS250.Machine your own profile for special fuels or applications.We also have other insert:11.8012.00 (standard)12.2012.4012.60All necessary O-ring grooves are pre-machined.If you want to order one of these inserts, just choose this product (alg-10093) and tell us the size you want in the comment box at shoppingcart/shipping.Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AE32149-A
SKU: alg-10093 Categories: ALL products, Aprilia, High performance, High performance, RGV250 VJ22, RS250, Shop, Suzuki, VHM productsGear 2nd driven z=26 no.14, RGV250/RS250
€115.62
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Triple Clamp Set, 3D, CNC Silver, CBR600RR to fit MC21/MC28
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3307
SKU: hon-11252 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28, Stock list, all modelsTriple clamp set CNC Silver, Honda VFR400
€673.59
CNC machined TYGA triple clamp set for your VFR400R/NC30.
These stylish, all aluminium triple clamps are a direct replacement for theVFR400R/NC30, and with the help of FEA testing not only do they look fantastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0244
SKU: hon-10621 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Carbon side covers (pair), Honda Monkey 125 2018-
€529.03
Carbon side covers (pair), Honda Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCC-7142
SKU: msx-10438 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopTank filler cap “racing”, Honda type 4
€69.87
Tank Filler Cap, Keyless, Racing Type, Honda
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and and mounting hardware, it can be installed in minutes. This product is suitable for nearly all Honda sportsbike models since the 1990s which have the usual 7 allen bolt mounting arrangement (3 which actually mount to the tank and the other 4 dummy ones for the outer ring)
Suitable for the following models:
- CBR 600 F4I F4 F3 F2 (1991-2008)
- CBR 600RR (2003-2011)
- CBR 900 (1995-1999)
- CBR 929 (all years)
- CBR 954 (all years)
- RC51 (all years)
- VTR 1000 (all years)
- CBR1000RR (all years)
- CBR 1100 1100XX (all years)
- CB 600F (07-10)
- CB1000R (08-11)
- CB 900F 919 Hornet 900 (all years)
- CBR 250RR (All Years)
- CBR 400RR (All Years)
- RVF 400 (All Years)
- VFR 400 (All Years)
TYGA no: TYLY-1222
SKU: hon-11441 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Hawk/Bros 400/650, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC36-2 -> RC30 replica products, RVF400RR NC35, Shop, Tank fillers, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VTR1000Sp1SP2