Meter stay, standard VFR400 NC30
€66.48
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: TYLY-0289
SKU: hon-11309 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Silencer, Carbon, Round, Slip-On, RVF400, Assy.
€381.35
This easy to fit bolt on silencer replaces the stock heavy aluminium one on the stock system and is an alternative to the more expensive full race system. Constructed from lightweight carbon fibre with stainless steel exit cap, and aluminium mount cap, it fits in minutes using the original hardware. Stainless steel mounting clamp is provided when you purchase this product.
Note, this silencer may not be legal for some states and territories
TYGA no: EXSL-0022
SKU: hon-10883 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, RVF400RR NC35, Silencers, Stock list, all modelsTop Triple clamp CNC black , Honda NSR250 MC18/MC21/MC28
€177.34
Top Triple Clamp, Race, CNC Black, NSR250
CNC machined top triple clamp for your NSR250. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy (TYLY-0141).
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-1041Â
SKU: hon-10263 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopSeat set street GRP GP-T, Honda NSR250 MC28
€846.53
Kit, Seat Set, GRP (Street), MC28 GP-T
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Street Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC28 but also an MC21 fitted with an MC28 fuel tank. The kit comprises parts shown below which are also available separately.
Note there are 4 MC28 GT-T seat cowling kits to choose from:
BPFS-0133 Street GRP
BPFS-0134 Race GRP
BPFS-0135 Street Carbon
BPFS-0136 Race Carbon
TYGA no: BPFS-0133
SKU: hon-10457 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC28, ShopSection header stainless WSS300 race system, KTM RC390
€226.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0077
SKU: ktm-10135 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarb Service Kit B, 21 pieces, Honda CB400 Super Four NC31
€40.95
Carb Service Kit B, 21 pieces, Honda CB400 Super Four NC31
LiteTek Carburettor Seal Kit to suit
Honda CB400 Super Four NC31
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x OR-016 Fuel T-Pipe O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MY9-690)
6x OR-024 Vacuum O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MY9-690)
4x OR-014 Float Vent O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MY9-690)
4x CS-005 Choke PLunger Cap, Material: HNBR, (Part of Honda Assembly Part No. 16046-MY9-690)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
Set windscreen molding and clips,
€25.91
Mini LED turn signal lamps. Universal fitting. Bright but small and discrete, these units are easy to install requiring just one hole. Ideal for the finishing touch of any custom project. Please note that any LED turn signals draw a smaller current than most standard fitment ones and will need suitable flasher relay in order to flash at the correct speed.
TYGA no: BPAC-0015
SKU: hon-11324 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Ducati, Honda, Mito 125, Monster, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC36-2 -> RC30 replica products, RG125, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2, Yamaha, ZXR250C, ZXR400LClip, Cowling, 4mm, Inner Cowl, MC28
€7.36
Clip, Cowling, 4mm, Inner Cowl, MC28
TYGA no: 64527-KE8-700
SKU: hon-11137 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28