Screen RSW, Honda NSR250 MC21/MC28
€52.00
Screen RSW, Honda NSR250 MC21/MC28
This screen fits the TYGA bodywork
TYGA no: SCRE-0079- SCRE-0080
SKU: hon-10251-hon10252 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28Carbon frame covers pair (Frame without steering damper) , Suzuki RGV250 VJ21
€341.09
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
TYGA no: BPCC-7121
SKU: suz-10154 Categories: ALL products, Bodywork and carbon, RGV250 VJ21, Shop, Suzuki, Various partsCarbon swing arm shark fin guard
€56.52
Universal , Swing Arm, Carbon Shark Fin Guard
This tough carbon shark fin is designed to fit on the bottom of most swing arms and is supplied with mounting hardware. Depending on the design, the swing arm itself can be drilled and tapped (for cast type) or if box section, then drilled through and the rivet nuts supplied in the kit can then be installed to make for a professional and trouble free installation.
TYGA no: BPCX-0005
SKU: alg-10276 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, Carbon, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Dax and Chaly, Desmosedici RR, Ducati, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Kawasaki, KSR110 2005- 10, KTM, Mito 125, Monster, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, RVF750 RC45, Sprockets, Suzuki, Suzuki RGV250, Universal parts, V-Max 1985 - 2007, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250C, ZXR400LSilencer stainless steel Motogp style (4 stroke) 50.8mm maggot , Honda CBR500
€227.37
Maggot silencer, CBR500, with 50.8 mm. inside diameter. With mounting lug suitable for CBR500R. Does not include pipe section or springs
TYGA no: EXSL-1013
SKU: hon-10344 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, Shop, SilencersSeat, Side Panel, Left, Green, Ninja 250R/300R 2013 -18
€38.42
Seat, Side Panel, Left, Green, Ninja 250R/300R 2013 -18
TYGA no: 53065-5016-H8
SKU: kaw-10175 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopBig bore kit 300cc wiseco VHM, NSR250 MC18/MC21/MC28
€2,842.71
Big Bore Kit, NSR300, Wiseco, VHM *
This 300cc Big Bore Kit is identical to the TPER-0007 300cc Big Bore Kit, but the standard 300cc heads and pistons are replaced with high performance options.
In this case we have forged Wiseco pistons that are lighter and stronger than stock, and also changable insert VHM cylinder heads, which have been specifically developed by TYGA and VHM for use with the TYGA 300cc Big Bore Kit.
See below for performance details for TPER-0007.
Bore & Stroke is 59mm x 54.5mm giving a total displacement of 298cc.
Parts included in the NSR300 kit.
Cylinder x 2 (includes head studs, RC valve, pulley & nut and washers)
Rear Head x 1
Front Head x 1
Piston x 2
Ring set x 2
Piston Pin x 2
Piston Clip x 4
S/E Bearing x 2
Head gasket x 2
Cylinder gasket x 2
RC Valve cables x 4
Water hose x 1
Exhaust Manifold x 2 (to fit TYGA pipes)
Other information:
There is no problem about the RC valves hitting the piston due to thin cylinder wall thickness. This is not an issue on our kit as it’s using different
cylinders, not modified NSR250. They are genuine OEM Honda cylinders, made and plated in Japan to their typical high quality.
The RC valves are easier to adjust than ever on the 300 kit, as there’s only one adjuster screw to play with, and each cylinder marked at the correct ‘fully open’ position for simple setting.
Exact Jetting requirements for your area and application cannot be provided due to differing atmospheric conditions around the world. However, following are some base settings to work from:
MC21 Std bottom end, Wire splice, TYGA Pipes, Airbox lid mod with filter.
Temp: 29 C
Press: 1015mb
Hum: 65%
Alt: 30m
MJ – #182/#185
JN – Std./Std.
SJ – #38/#38
AS – 1.5 turns out
PwrJ – Std./Std.
Tip: Cooler temps, higher pressure and/or lower humidity require richer jetting. High altitude requires leaner settings. Starting off with rich settings will in the worse case foul a plug. Too lean a setting may destroy the engine.
This jet set-up is for guidance only. TYGA Performance cannot be held responsible for any engine damage incurred due to incorrect settings.
At present, this kit is available by special order. Each kit takes approx. four weeks to prepare.
TYGA no: TPER-1007
SKU: hon-10391 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopCarbon upper cowling with airducts, stock shape, NXA RS250R (2001- ’08)
€850.63
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Rear hugger/chain guard, Kawasaki ZXR250 2008- 12
€185.61
Rear Hugger/Chain Guard (GRP), Ninja 250R
Ideal for keeping road dirt and rain away from the rear shock and underside of your Ninja. Styled to look in keeping with the design of the bike. Easy to install.
TYGA no: BPFH-7016
SKU: kaw-10047 Categories: ALL products, Bodywork, Kawasaki, Ninja 250R 2008- 12, Shop