Carbon exhaust shield, Yamaha R1 2007-8
€161.70
Weighs approx 0.14 kg.
TYGA no: BPCX-7102
SKU: yam-10009 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2007- 8Triple clamp set CNC black, Honda CBR250 MC22 -> RVF400 fork
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1231
SKU: hon-11231 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersSet pipe, Full race with oval carbon silencer NEW, Kawasaki ZXR250 2013 –
€769.95
2013-2017, Set, Pipe, Full Race System, Ninja 250R, Carbon Oval Silencer
We have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 250 when used with the TYGA system*. Made in stainless steel with spring mounted Carbon Oval silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an Carbon oval silencer EXSL-0043
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0015.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 250 Exhaust pipe sections and silencers.
TYGA no: EXPS-0078
SKU: kaw-10061 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Set, Slip On, Stainless, Oval, Carbon End Cap, Ninja 400
€382.38
Set, Slip On, Stainless, Oval, Carbon End Cap, Ninja 400
This system comprising of a spring mounted stainless steel silencer with a sleek carbon end cap and stainless steel final section increases performance, saves weight and enhances the looks of the bike. Supplied with a removable decibel killer already fitted, this system is not loud. (May not comply with noise regulations for some states and territories).
Easy and quick to install, this exhaust system will give instant and noticeable improvements at an affordable price.
This system is supplied with oval stainless silencer with carbon end cap EXSL-0072
Note: This product utilizes the original Kawasaki mounting clamp from the stock exhaust
Can be used with both the stock exhaust hanger or the lightweight TYGA Ninja 400 exhaust Hanger (TYLY-0213
TYGA no: EXPS-0101
SKU: kaw-10099 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Kawasaki, Ninja 400R 2018-Set full race system high level with carbon silencer with carbon cap, Honda MSX125SF GROM
€519.40
Set, Pipe, Full Race System, High Level, MSX125SF Grom, Carbon Oval/Carbon End Cap. Second Generation.
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2100 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom
EXPS-0067 Stainless Oval High level System for 2016 MSX125SF second generation Grom
Note: Some modification of the stock Honda rear hugger (no modification required if using the hugger BPCH-7028 and BPCH-7128) and stock Honda rear fender is necessary to install this system
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0066
SKU: MSX-10339 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopCarbon tank cover glue on type, Honda MSX125 GROM
€66.48
Carbon tank cover. Fits over nasty the plastic stock item and transforms the appearance of your bike. Installs in minutes. Note, we also offer BPCX-9828 which is a direct replacement for the plastic Honda cover for those people wanting to get their tools out and wishing to make a more permanant transformation.
TYGA no: BPCX-7028
SKU: MSX-10032 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopCarbon heel guards, Aprilia RS125
€138.72
Stock shape heelguards replace nasty plastic painted original ones on Aprilia Extrema and RS125 models up to 2006.
Update your bike with this beautiful carbon product
TYGA no: BPCC-7007
SKU: apr-10010 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopSeat set street T13 with carbon, Honda RVF400 NC35
€1,102.07
This set of bodywork is designed to replace the NC35 stock seat cowling with our T13 seat cowling kit and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the deluxe version without carbon fiber front section, undertray and carbon between air ducts on top and underneath. We also offer a budget version of the same kit, see also BPFS-0117.
TYGA no: BPFS-0118
SKU: hon-10316 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop