Side Cowling, Right, Race, GRP, KTM RC390 WSS300
€199.10
Side Cowling, Right, Race, GRP, KTM RC390 WSS300
Replacement Side Cowling, Right, GRP, Race, WSS300, MUST be used with KTM WSS300 hardware
see also:
BPCU-7331UR (Carbon Unpolished)
BPCU-7331R (Carbon Clearcoated)
Grommet, Tank, Side, MC28
€0.59
Grommet, Tank, Side, MC28
TYGA no: 83551-300-000
SKU: hon-11135 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Carbon rear hugger,Honda CBR250 2011 – CBR300 2014
€236.91
This lightweight carbon version of the stock hugger will enhance the beauty of your CBR as well as reduce unsprung weight.
TYGA no: BPCH-7208
SKU: hon-10183 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, CBR250R 2011 - 15, CBR300R 2014-, Honda, ShopUpper Cowling (Street GRP) MC21, Stock Shape, Painted Rothmans
€462.64
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFU-0006Painted
SKU: hon-11282 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, SilencersSet exhausts side by side stainless steel, Honda NSR250 MC21
€769.95
The ultimate set for your Honda NSR250 NSR300!!
Set exhausts side by side stainless steel, Honda NSR250 MC21/MC28
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Our TYGA Performance Honda NSR250 two stroke motorcycle expansion systems are now THE system to have gracing your NSR250. And why not? TYGA pipes for NSR 250s are available for MC21 and MC28 models and there are two styles of chamber to choose from:
Tyga Side By Side (SS) which exit conventionally on left and right
For more information on how to get the best power out of this system, combine it with other parts of our MC21 Power Up Kit (see under ‘technicical help’ on right hand menu) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)Important when ordering
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set.
TYGA no: EXCS-0005a
SKU: hon-10260 Categories: 2 stroke exhaust sets, ALL products, By model, Exhausts, Exhausts, Honda, NSR250 MC21, ShopCarbon upper cowling with airducts, stock shape, NXA RS250R (2001- ’08)
€850.63
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Carbon front fender, Kawasaki ZXR250 2008 –
€218.25
Great front fender for ZXR250, easy to instal and looks cool
Carbon direct replacement for OEM Kawasaki item.
Weighs a fraction of the original fender and sets your bike out from the crowd. Pre drilled for easy fitting.
TYGA no: BPCF-7016
SKU: kaw-10014 Categories: ALL products, Carbon, Kawasaki, Ninja 250R 2008- 12, ShopFront Fender Blue, Honda MSX125 GROM
€88.02
Front Fender, Blue, MSX125 Grom
TYGA no: 61100-K26-901ZE
SKU: MSX-10226 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop