Cover, Lower Left, GRP, Glossy Black, Assy, VFR750 3rd Gen, 90-93
€122.86
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: BPFX-7049
SKU: hon-11336 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Handle bar set, Honda RS250 NX5
€216.82
Handlebar Set, Silver, NX5
Design based on the genuine HRC bar clamps as used on the NX5. Made from 6061-T6 for strength and durability, ideal for replacements for your Honda RS250 or for building a special. Designed for 50mm/52mm clamping surface, with an angle of the bars set at 17° This is the same as stock HRC clamps and is more radical than the usual <10° which most of our other handle bar clamps are set at. Fits Honda RS250R NX-5 and will work on any bike with 50mm which is most upside down types ( make sure to check before ordering)
TYGA no: TYLY-0159
SKU: hon-11213 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopUndertray street GRP GP-T, Honda NSR250 MC21/MC28
€75.27
Undertray, Street, (GRP), NSR250 GP-T
This product is to be used with BPFT-9033, BPFT-9133, BPCT-9033 and BPCT-9133 seat cowlings
Also to be used with BPFX-9133 Registration Plate Holder GP-T.
Note the following products are all compatible with the above seat cowlings and are interchangable between the MC21 and MC28
BPFX-9033 Undertray Street GRP
BPCX-9033 Undertray Street Carbon
BPFX-9333 Undertray Race GRP
BPCX-9333 Undertray Race Carbon
TYGA no: BPFX-9033
SKU: hon-10469 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopRear wheel spacer kit aluminium, Honda NSR250 MC21
€73.71
Replace the heavy steel rear wheel spacers and wheel bearing distance spacer with these lightweight 6061-T6 aluminium spacers. Lighter weight allows the suspension to react more positively, so better handling and good looks!
TYGA no: TPER-0039Â
SKU: hon-10396 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopMeter stay, standard VFR400 NC30
€66.48
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: TYLY-0289
SKU: hon-11309 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Cover, Generator, Ninja 250R 2008 -12
€79.66
Cover, Generator, Ninja 250R 2008 -12
TYGA no: 14031-0080
SKU: kaw-10223 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopScreen, RC36-2, RC30 Style
€52.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: SCRE-0182
SKU: hon-11517 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSeat set race, Honda NSR250 MC28
€481.20
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0046Â
SKU: hon-10242 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC28, Shop