Engine Filler Cap, CNC, Grey, Genuine Honda Part

Gasket, Reed Valve, NSR150SP

Handy mirror blanking plates for your 250/400 sportsbike.

No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.

Mounting pitch is 30mm, so will fit many models.

2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.

Section, Mesh Slip-On, Stainless, Yamaha YZF-R25 and YZF-R3

For use with EXPS-0069 only.

The Slip joint is 2 internal, and can also be fitted to any 2 pipe

Temp Gauge, Race, Honda 1/8″ NPT

Stand alone temperature gauge for race use. Ideal for monitoring engine coolant temperature.

Pre-fitted with 1/8″ NPT adapter. Just remove the standard temperature sensor and screw in this replacement.

Displays temperature in Centigrade, up to 99.9C

Race use only. No back light function.

Supplied with 2x LR44 batteries (not fitted).

**NOTE** Some machines may use the temperature reading from the standard sensor, in which case alternative mounting may be required.

Fits:

RVF400 NC35
VFR400 NC30
NSR250 (All models)
NSR150SP
CBR400RR NC29
Also fits all Honda Motorcycles who are using thermo units with OE part numbers 37750-PC1-004 and 37750-KV3-951

This sleek integrated double headlight unit uses OSRAM 35/35 halogen bulbs and modern reflector and refractor technology . Comes complete with loom and is ready to plug in. This is suitable for the TYGA Performance fairing BPFU-9028

Boyesen Dual reeds, Cagiva Mito125
Boyesen Power Reeds use a patented dual-stage fiberglass design for more airflow, more air velocity and more overall power.

Boyesen dual-stage power reeds produce a better throttle response right off idle and through the mid-range when compared to the traditional Power Reed setup.

For NSR125 order:

1 set

For NSR250 order:

2 sets

Steering Stopper, Honda VFR750R RC36 (94-97)

Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.