fairing set street RC211V, NC30 kit
€902.65
Fairing set street RC211V, NC30 kit
The kit faithfully reproduces many of the 2006 model RC211V fairing features including front air ducts, side air duct design and full console joining up to the tank.
This set of bodywork requires extensive modification of the NC30 including a meter stay for quick fastening of fairing upper and for the instruments to gain clearance with headlights. It also includes a steering stopper to limit steering movement.
Comprises the parts shown in the picture which are also available separately:
*A clear screen is provided.
*A headlight with NO turn signals is provided unless you specify with turn signals.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0032
SKU: hon-10065 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Carbon rear hugger, Kawasaki ZX10R 2011-13
€150.56
High quality carbon products, perfect fitment and easy to install. Gives your bike that SBK look
Lightweight carbon fibre direct replacement for Kawasaki OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
Section header stainless WSS300 race system, KTM RC390
€226.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0077
SKU: ktm-10135 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsUpper stay GP-T, Honda NSR250 MC21/MC28
€98.49
Upper Stay, NSR250, GP-T, Assy.
Lightweight GP style upper stay complete with plastic bungs and R clips for quick fairing assembly and removal.
Compatible Parts
TYGA upper cowlings, BPFU-9033 and BPCU-9033.
TYGA no: TYLY-0121
SKU: hon-10535 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopCarbon engine cover left, Honda CBR1000 2008 -15
€102.42
Engine Cover, Left, (Carbon) 2008-15 CBR1000RR
This lightweight carbon cover fits over the engine case and has kevlar reinforcing, designed to protect your engine against scratches and damage in the event of an accident.
Beautiful, perfect fitment and give your bike that HRC look.
TYGA no: BPCC-8101L
SKU: hon-10446 Categories: ALL products, Carbon, CBR1000 2008-11, CBR1000 2012-, Honda, ShopVHM Cyl. Headset Honda CR250 ’05-’07
€347.95 €303.33
VHM Cyl. Headset Honda CR250 ’05-’07 (alg-10213) AA33084VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (20.20cc)Optional inserts:– blind– 19.80– 20.60This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33084Â Â Â Â Â Â Â Â
SKU: alg-10213 Categories: ALL products, Honda, Honda MX, Motocross, Shop, VHM productsKit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
€885.87
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: BPFS-0188
SKU: hon-10980 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopTop triple clamp silver, CBR250 2011 –
€187.52
CNC machined TYGA top triple clamp (without detachable key holder for race use) for your CBR250R and CBR300R
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch holder can be ordered separately or together with this product as set TYLY-00069
TYGA no: TYLY-0069(p)
SKU: hon-10190 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, Shop