Fuel Tank, GRP, HONDA NSR500 V NX6
€977.66
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Lower Cowling (Carbon), NC30, GP-T, Assy.
€473.74
Lower Cowling (Carbon), NC30, GP-T, Assy.
This product is designed to be used with BPCU-9034 as part of the Bodywork set BPFS-0146
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also GRP version BPFL-9034.
Compatible products:
This product must be used with BPCU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.
HEL rear brake line standard, Honda MSX125 GROM
€76.14
HEL rear brake line standard, Honda MSX125 GROM (msx-10129)
Kit includes:
1x HEL Brake Line
4x Sealing Washer
2x M10x1.25 Banjo Bolt
20 degree side bend banjo goes to master cylinder. 45 degree banjo goes to caliper.
Route the hose through the standard brake hose retaining clips.
TYGA no: BLSR-0009Â
SKU: MSX-10129 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsCarbon meter cover black, MC21/MC22/NC35/NC29/SC28
€40.76
Carbon Meter Cover MC21, MC22, NC35, NC29, SC28
Attractive carbon cover for MC21 meter assembly.
For fitment, simply remove adhesive backing and pop it on over the three foam retaining buttons.
Fits?Honda models as follows: CBR900RRN/RRP/RRR, RVF400 NC35, CBR400 NC29, CBR250 MC22.
TYGA no: BPCC-0004
SKU: hon-10377 Categories: ALL products, Bodywork and carbon, Carbon, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR125 JC22 1994 - 2003, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various partsFront Fork Preload Adjusters blue/red (Pair), Honda MC18/MC21/MC28/NC30
€262.31
Fork Caps, Full adjustment.
Many race replica street bikes are graced with adjustable suspension as standard, but as with many ‘so-called’ adjustable suspension systems on production bikes, the actual adjustment available is very limited. The manufacturer lets you adjust within very tight parameters so that it’s difficult to get the settings wrong.
The TYGA fork tops do away with this dictator attitude, allowing you to take control of your set-up.
The preload adjustment is increased, with an extra 4mm possible, and we also provide a full 20 clicks of rebound adjustment that works!
Another great feature is the easy-turn knob for rebound adjustment. No more fumbling around for the screw driver.
The fork tops are manufactured from top quality anodized 6061 T6 aluminium and come ready to install, and are a direct replacement for the standard parts. Securing to the fork tube is by a pin spanner that is provided.
Basic suspension rebuild skills are useful for fitting, but full instructions will be provided.
Fits MC21SE/SP, MC28SE, MC18SP & NC30.
Please note that these Fork Caps will not work with ‘R’ spec NSR forks, or ’89 NC30, as these are preload adjustment only type forks.
TYGA no: TYLY-0038
SKU: hon-10355 Categories: ALL products, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Upper Cowling, Front, (GRP), T13 style, Assy.
€141.68
Upper Cowling, Front, (GRP), T13 style, Assy. This products is a replacement part for bodywork sets BPFS-0115 and BPFS-0119
TYGA no: BPFU-9218F
SKU: hon-10811 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Gasket, Head, MC21/28
€22.03
Gasket, Head, MC21/28
TYGA no: 12251-KV3-830
SKU: hon-11185 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Tyga Step Kit Replacement Peg Spacer, Black, MSX125 Grom
€9.68
Tyga Step Kit Replacement Peg Spacer, Black, MSX125 Grom