Fender stay, CBR600RR conversion set
€26.08
Fender Stay, CBR600RR Conversion, Set
Front fender lowering stays to use with CBR600RR front fork conversion when using 120/60-17 tyres
TYGA no: BPSY-0239
SKU: hon-10987 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Set exhaust, race system double maggot , KTM RC390 2014 – 2016
€726.37
.Set, Pipe, Race System, RC390, Stainless Moto Maggot
Update your bike with this great TYGA performance, KTM power part!!
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual under seat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected than systems which have the exhaust exiting the right of the swing arm. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is not supplied or compatible with a decibel killer for noise reduction and is very loud! Please be warned!
Compatibility
This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
For use with standard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0062 for similar system.
** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.
Customization
Performance and Dynograph
Please refer to dynograph
A) All Standard.
B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition map
C) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition map
Very useful gains especially in the mid range for both B) and C), for much stronger acceleration.
The silencer was full bore. No decibel killer used.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0062
SKU: ktm-10059 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopTriple clamp set CNC black, Suzuki SV650
€573.36
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.
Section, Collector 1-2, KTM RC390 Serpent
€61.37
Section, Collector 1-2, KTM RC390 Serpent
TYGA no: EXPT-0053
SKU: ktm-10116 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsMirror Stay Rubber, MC28
€10.71
Mirror Stay Rubber, MC28
TYGA no: 88112-KV3-830
SKU: hon-11134 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Seat set race RC211V, NC35 kit
€624.66
This set of bodywork is designed to replace the stock seat cowling with the race version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the race version without the street gear. We also offer two street versions of the same product which also include an LED Tailight and a registration/license plate holder, see:
BPFS-0029 (street, carbon front section)
BPFS-0035 (street GRP)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0030
SKU: hon-10135 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopSilencer, Stainless Moto Maggot, Right, KTM RC390 Serpent, No fittings
€205.51
Silencer, Stainless Moto Maggot, Right, KTM RC390 Serpent, No fittings
Maggot silencer with 35 mm. inside diameter. Does not include pipe section or springs
TYGA no: EXSL-8113R(p)
SKU: ktm-10123 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsSection, Collector, Intermediate, Upper, Stainless, VFR750F, 3rd Gen, 90-93
€66.48
TYGA no: EXPT-6151
SKU: hon-11347 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93