Torque arm link Titanium, Honda NSR250 MC21
€326.36
Torque Arm Link, MC21
The NSR250 engine is rubber mounted to the frame to reduce vibration. The torque arm link that is fitted between the swing arm pivot and the engine stops the engine from lurching backwards and forwards during acceleration, deceleration and gear changes, while still absorbing the engine vibrations.
Over time, the torque arm link bushes become worn and loose. This then allows small movements especially when power is applied. It is particularly noticeable when changing from one low gear to another and makes the gear change feel very clunky.
The initial reaction is to check the gearbox, but before going there, it is a good idea to check the torque arm and if it is worn, to replace it with this high quality titanium upgrade. The improvement can be dramatic.
Replaces the following Honda OEM part numbers:
- 50184-KV3-830
- 50186-KV3-830
- 50188-KV3-830
- 50185-KV3-830 (assy of the above 3 part numbers)
This part, which is very hard to find as a genuine product, is made of 64 titanium by T2Racing, and all parts are made of full titanium.
*One set consists of 3 parts for each part. We do not sell individual items.
*Two collars are already press-fitted into the link body.
TYGA no: TPER-5005
SKU: hon-11377 Categories: ALL products, High performance, High performance, Honda, NSR250, NSR250 MC21, Shop, Various partsBig bore 150cc (300 kit) cylinder OEM/TYGA, Honda NSR250
€781.41
Cylinder, NSR300 Kit
Replacement Cylinder for TYGA 300cc Big Bore Kit.
Complete with RC valve.
Does not include RC valve pulley
TYGA no: TPER-0028
SKU: hon-10995 Categories: ALL products, High performance, High performance, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Top Triple clamp CNC black , Suzuki RGV 250
€218.46
CNC machined TYGA top triple clamp ( without detachable key holder for race use) for your RGV250 VJ22.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch holder can be ordered separately or together with this product as set TYLY-1046.
TYGA no: TYLY-1046(p)
SKU: suz-10056 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiToptripleclamp nut, RGV250 / RS250
€30.34
Top triple clamp nut. CNC 3D machined from 7075 T6 aluminium. Light weight and good looking. Clear anodised for a long lasting finish.
This nut is a direct replacement to the top nut on:
Suzuki VJ21,
Suzuki VJ22
Aprilia RS-250
Suzuki SV650
and others. The thread is M22X1.
Torque setting: 65Nm
TYGA no: TYLY-0048
SKU: alg-10013 Categories: ALL products, Aprilia, By product, CNC parts, CNC parts, CNC parts, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Various partsCarbon Front fender, Aprilia RS250
€195.96
This is a stock shaped fender complete with mounting holes pre drilled for ease of fitment.
Fits both Aprilia RS250 models, but styled from the MK2 RS250.
Weighs a fraction of the stock one at approx. 250g
Update your bike with this great carbon product, direct replacement of the original part.
TYGA no: BPCF-9007
SKU: apr-10021 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopExhaust set slip on, oval carbon silencer with cap, Honda MSX125 GROM
€432.66
Made in stainless steel with spring mounted carbon silencer, and precision made CNC machined end cap. This system significantly increases performance, saves weight and gives the best bang for the buck! (May not comply with noise regulations for some states and territories)
This system is supplied with a carbon silencer EXSL-0042.
Feel free to request this product with no TYGA logo. we understand not everyone wants their bike to be covered with graphcs and won’t be offended. Simply put in the comment box with your order: ‘Please supply with no TYGA logo’. Just let us know your requirements; we want to provide the best possible product for your application
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is from installing the TYGA Slip On set (EXPS-0040).
A useful gain all through the range.
TYGA no: EXPS-0040
SKU: MSX-10073 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopCarbon kill switch cover, Honda
€25.10
This cover fits on the kill switch to prevent accidental switching off of the engine in race situations. As used in Moto2 by Team SAG.
Attach with small amount of epoxy or silicone adhesive.
Will fit on many Honda’s and other brands motorcycles.
TYGA no: BPCC-0037
SKU: hon-10616 Categories: ALL products, Carbon, CBR400RR NC23, Honda, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VTR1000Sp1SP2Carbon fuel tank (early type), Honda RS250R NX5
€1,444.49
Fuel Tank, Carbon, RS250R NX5 (Early Type)
Top quality reproduction of the early non ram air version NX5 fuel tank in carbon fiber.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel, Avgas 100LL to E85 (85% ethanol). Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light ( 2.25 kg) Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts and following the stock shape, the following stock parts can be used (not included):
Fuel Cock
Breather
Front strap
Stock mounting rubbers
Filler cap and seal
IMPORTANT: Please note that this fuel tank, for ease of manufacture, uses the later flush fitting NX5 type filler cap. This can be purchased from HRC (part numbers 17521-NX4-680 for filler cap and 17515-NX5-770 for seal) or we can supply our own TYGA version (Cap: TYLY-0178A, Seal: BPSY-0238) Note the filler cap and the above list of parts are not included with the fuel tank and needs to be purchased separately.
TYGA no: BPCG-0003
SKU: hon-10946 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop