Set pipe Full race system WSS300 (street), KTM RC390
€1,155.39
Set, Pipe, Full Race System, WSS300, (Street) KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0111
SKU: ktm-10146 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarb Service Kit A, 48 pieces, Honda VFR750R RC30
€97.64
Carb Service Kit A, 44 pieces, Honda VFR750R RC30
LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC30
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-025 Float Bowl Ring, Material: Flourosilicone *
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A *
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A *
4x OR-040 Air Cut Seal, Material Viton 70A *
4x OR-041 Breather O Ring, Material: Viton 70A **
4x OR-016 Top Cap O-Ring, Material: Viton 70A *
4x OR-042 Float Bowl O-Ring, Material: Viton 70A *
4x OR-011 Overflow O-Ring, Material: Viton 70A **
4x OR-012 Fuel Tee O-Ring, Material: Viton 70A **
4x CS-004 Choke Plunger Cap, Material: HNBR
Honda OEM parts numbers :
* No: 16010-MR7-014 → 16010-MR7-505 or 16010-MR7-691 → 16010-MR7-692 → 16010-MR7-505
** No: 16040-MR7-004
TYGA no: CK-Honda-RC30
SKU: alg-10349 Categories: ALL products, Carburettor Service Kits,, Honda, VFR750R RC30Exhaust Chamber, Left, GP Type, Stainless Steel, RGV250, VJ22
€305.44
Bare replacement left side chamber for chamber set EXCS-0010L
Fork Caps, Silver/Black, Full adjustment, Honda MC18/MC21/MC28/NC30
€249.74
Fork Caps, Silver/Black, Full adjustment.
Many race replica street bikes are graced with adjustable suspension as standard, but as with many ‘so-called’ adjustable suspension systems on production bikes, the actual adjustment available is very limited. The manufacturer lets you adjust within very tight parameters so that it’s difficult to get the settings wrong.
The TYGA fork tops do away with this dictator attitude, allowing you to take control of your set-up.
The preload adjustment is increased, with an extra 4mm possible, and we also provide a full 20 clicks of rebound adjustment that works!
Another great feature is the easy-turn knob for rebound adjustment. No more fumbling around for the screw driver.
The fork tops are manufactured from top quality anodized 6061 T6 aluminium and come ready to install, and are a direct replacement for the standard parts. Securing to the fork tube is by a pin spanner that is provided.
Basic suspension rebuild skills are useful for fitting, but full instructions will be provided.
Fits MC21SE/SP, MC28SE, MC18SP & NC30.
Also available in Blue/Red see TYLY-0038
Please note that these Fork Caps will not work with ‘R’ spec NSR forks, or ’89 NC30, as these are preload adjustment only type forks.
TYGA no: TYLY-1038
SKU: hon-10967 Categories: ALL products, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Gasket exhaust, Honda VFR400 NC30 / RVF400 NC35
€3.92
Compatible with:
With NC30/35 exhaust systems including TYGA systems (included in set EXPS-****). Suitable for most Honda four stroke systems.
TYGA no: 18291-MN5-650
SKU: hon-10503 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Honda, RVF400RR NC35, Shop, Various parts, various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97Carbon chain guard, Suzuki GSX 1000 K7-K8
€131.62
One piece, high quality carbon fiber chain guard made to original shape and dimensions.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
Screen Clear, KTM WSS300 Fairing
€52.00
Screen Clear, KTM WSS300 Fairing
For use with KTM WSS300 Upper Fairing and the followingTYGA upper fairings:
BPFU-7331
BPCU-7331U
BPCU-7331
Sprocket holder CNC black, Honda NSR250 MC21
€198.07
CNC machined TYGA sprocket holder for your NSR250 MC21R/SE/SP.
Designed and machined in house by TYGA, as a direct replacement for the ugly and heavy standard MC21 sprocket holder.
Crafted from aircraft spec 6061-T6 alloy, and supplied with bearing, seals and alloy (6061-T6) spacer, the sprocket holder is ready to fit.
Not only is this part a major cosmetic improvement, but it is only 60% as heavy as the OEM part. This means less unsprung mass, and also less rotational mass. The best case scenario.
TYGA no: TYLY-0043
SKU: hon-10393 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, Shop