Racing step kit CNC silver, Honda hawk/bros400/bros650
€307.32
Designed in-house by TYGA Performance using CAD/CAM software, these CNC machine-made step kits are manufactured from top quality aircraft grade aluminium.
Carbon heel guard on left side hanger included. The right side carbon brake/heel guard shown in some pictures of this step kit assembled on the bike is a separate product. For right side heel guard order part number BPCC-9002 or BPCC-9010R)
Now includes brake light switch provision.
This step kit moves the peg position back 15 mm. and up 10 mm. from standard. Pitch of hanger frame mounting holes is 78 mm.
TYGA no: STAA-0012
SKU: hon-10271 Categories: ALL products, By model, Hawk/Bros 400/650, Honda, ShopSubframe aluminium , Honda RVF400 NC35
€493.97 €444.57
This lightweight aluminium subframe is closely modelled on the stock NC35 subframe and can be substituted for the heavy steel one with a weight saving of XXX. Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, seat pad, undertray, radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe, there are even two mounting holes in case you wish to install a remote reservoir rear shock (BPCC-0046 is a direct fit), so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie, starter relay etc which are normally attached directly to the undertray
TYGA no: TYLY-0225
SKU: hon-10985 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, Various partsSet pipe Full race system WSS300, KTM RC390 2022-
€1,180.91
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0160
SKU: ktm-10196 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsKit, Single Seat Cover Conversion, Green, Ninja 250R/300R 2013 -18
€173.72
Kit, Single Seat Cover Conversion, Green, Ninja 250R/300R 2013 -18
TYGA no: 99994-0354-777
SKU: kaw-10160 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopSeat Support, GRP, RS250R NX5
€100.33
Seat Support, GRP, RS250R NX5
For use with seat cowling BPFT-9036 and BPCF-9036
TYGA no: BPFX-9036
SKU: hon-10978 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon upper cowling with airducts, stock shape, NXA RS250R (2001- ’08)
€850.63
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Carbon air duct NX6 NSR500V
€139.58
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Top Triple Clamp, CNC Black, NC35 RVF400
€196.92
Top Triple Clamp, CNC Black, NC35 RVF400
CNC machined TYGA top triple clamp with detachable key holder for your RVF400 NC35
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
This product can be bought as a set TYLY-1042 with detachable ignition switch holder TYLY-1142.
TYGA no: TYLY-1042(p)
SKU: hon-10783 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all models