Silencer, Carbon/Carbon End Cap, Oval, Slip-On, RVF400, Assy.
€476.54
This easy to fit bolt on silencer replaces the stock heavy aluminium one on the stock system and is an alternative to the more expensive full race system. Constructed from lightweight carbon fibre with carbon exit cap, and aluminium mount cap, it fits in minutes using the original hardware. Stainless steel mounting clamp is provided when you purchase this product.
Note, this silencer may not be legal for some states and territories
Upper fairing set street RC211V, CBR250RR MC22
€451.91
This set of bodywork comprises of the parts shown below which are also available separately
*A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock MC22. It fits to the original meter and mirror stays and uses the Honda mounting points and fasteners for mirrors. Where it mounts to the lower cowling and frame, it uses the original Honda bolts and clips (not supplied)
Indicator, Rear, Right, Ninja 250R/300R 2013 -18
€33.99
Indicator, Rear, Right, Ninja 250R/300R 2013 -18
TYGA no: 23037-0248
SKU: kaw-10166 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopCarb Service Kit A, 47pieces, Kawasaki ZXR400
€90.08
Carb Service Kit A, 35 pieces, Kawasaki ZXR400
LiteTek Carburettor Seal Kit to suit: Kawasaki ZXR400
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-005 Float Bowl Ring, Material: Flourosilicone (OE part number: 92055-1426)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (OE part number: 92055-1002)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (OE part number: 92055-1003)
4x OR-032 Float Valve O-Ring, Material: Viton 70A (OE part number: 92055-1425)
4x OR-030 Outside Fuel O-Ring, Material Viton 70A (OE part number: 92055-1004)
8x OR-031 Centre Fuel & Outside Breather O-Ring, Material: Viton 70A (OE part number: 92055-1223)
4x CS-004 Choke Plunger Cap, Material: HNBR (OE part number: 16012-1052)
3x SC-008 Throttle Synch Screws, Material Stainless Steel (OE part number: N/A)
TYGA no: CK-Kawasaki-ZXR400
SKU: alg-10345 Categories: ALL products, Carburettor Service Kits,, Kawasaki, ZXR400LSilencer carbon SHORTY 60mm 2 stroke
€156.20
This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40 kg) is made from CNC machined end caps joined by a carbon fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0067 Shorty Aluminium
EXSL-0066 Shorty Carbon/Kevlar
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0065
SKU: alg-10258 Categories: 2 stroke exhaust sets, ALL products, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, Shop, Suzuki RGV250Carbon front fender HRC style, Honda SP1/SP2
€209.33
This fender has been molded off a genuine factory HRC front fender as used by Colin Edwards etc. High quality carbon fibre gloss finish. This fender is designed to work with factory front end but can be used with stock SP1/SP2 front end.
Please note that the rear mounting holes need to be drilled by the customer. This is because the HRC front end uses a different mounting point to the stock SP1/SP2 front end.
Update your bike with this great carbon product.
VHM insert, Aprilia RS125
€89.95
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AE32008-B
SKU: alg-10176 Categories: ALL products, Aprilia, RS125, Shop, Various parts, VHM productsTyga Step Kit Replacement Gear Shaft Clamp
€12.72
Tyga Step Kit Replacement Gear Shaft Clamp
TYGA no: STGA-0002
SKU: hon-10789 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, Kawasaki, Ninja 400R 2018-, NSR250, NSR250 MC21, NSR250 MC28, Stock list, all models