Exhaust Chamber, Right, Side By Side Type, Stainless Steel, RGV250 VJ22
€281.46
Bare replacement right side chamber for EXCS-0009R
Carbon fork guard right, Honda Monkey 125 2018-
€84.32
Carbon fork guard right, Honda Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCC-7042R
SKU: msx-10434 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopSilencer carbon/carbon cap, Yamaha R25 / R3
€275.21
Replacement Silencer, Carbon, Oval/Carbon End Cap, Yamaha R25/R3
Hand assembled with carbon sleeve. Precision made CNC machined mount cap, with sleek carbon end cap.
This is a direct bolt on to the standard R3 headers. Just remove the stock silencer and exhause cover and fit the TYGA silencer.
This silencer looks great, significantly reduces weight without adding any noticeable volume.
(May not comply with noise regulations for some states and territories).
Note: This product is supplied with a genuine replacement exhaust gasket to fit where the TYGA pipe joins the Yamaha header pipes. It does not include the special high temp resin exhaust guard BPCC-7033.If you require the exhaust guard to complete the transformation, please order set EXPS-0060 and save money over ordering individual parts.
TYGA no: EXSL-0056
SKU: yam-10048 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Shop, Yamaha, YZF-R25/R3Screen Clear, Honda NX5 RS250R (late model style)
€52.00
Screen Clear, Honda NX5 RS250R
TYGA no: SCRE-0168
SKU: hon-10910 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopFitting Kit for Tail Light, RC30
€43.88
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYBP-0297
SKU: hon-11519 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsHandle bar clamp left ” hinge type” black, KTM RC390 2014 -24
€106.61
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731L
SKU: ktm-10213 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsClutch lever black, NC29 NC30 NC35
€29.95
CNC machined out of solid billet. Dog legged lever for Honda 4 stroke models such as NC23, 29, 30, 35 etc and similar models. (See alternative straight version for NSR250 and CBR250RR).
TYGA no: LEVC-9012Â
SKU: alg-10054 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, CNC parts, CNC parts, CNC parts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Silencer carbon/carbon end cap, round, 2" x 380mm
€426.38
Silencer carbon/carbon end cap, round, 2" x 380mm
This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
* Please note that a decibel killer cannot be used with our carbon sleeved silencers.
TYGA no: EXSL-0081
SKU: hon-11012 Categories: ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97