Carbon side trim cover (pair), Honda MSX125SF GROM
€75.79
Side Trim Covers, Pair (Carbon) MSX125SF
Carbon side trim to decorate your MSX125 Grom. Precision molded, these fit over the stock plastic stock items and transforms the appearance of your bike. Install with double sided tape provided or with silicone sealant for a really permanent installation.
TYGA no: BPCC-7028
SKU: MSX-10394 Categories: ALL products, Bodywork and carbon, Carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020Sub frame aluminium GP-T, Honda NSR250 MC21/MC28
€196.44
Subframe, Aluminium, NSR250 MC21/28 GP-T
This lightweight aluminium subframe weighs less than 1.2 kg and replaces the stock item when used as part of the NSR250 GP-T seat kit. Essential for mounting the seat cowl, this component is supplied with all brackets and mounting points to substitute this for the OEM Honda item. Composed of extrusions and CNC machined sections, handwelded together by craftsman, this subframe is then blasted and anodized for a tough and attractive finish. Supplied with a regulator/rectifier stay as well as cable ties for securing the wiring.
Compatible Parts:
Use with seat cowling kits
BPFS-0128, 0129, 0130, 0131, 0132, 0133, 0134, 0135 and 0136
TYGA no: TYLY-0108
SKU: hon-10458 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopDisc Brake, Front, Ninja 250R/300R 2013 -18
€302.52
Disc Brake, Front, Ninja 250R/300R 2013 -18
TYGA no: 41080-0578-11H
SKU: kaw-10181 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopUpper cowling stock shape painted RR, Honda RVF400 NC35
€545.50
Stock shaped GRP upper fairing, comprising the upper and two side inspection covers of the OEM plastic panels. Supplied with light holes and light fittings but indicator positions smoothed off. Should be used with BPFL-0103 (Painted RR)
TYGA no: BPFU-0029 (Painted RR)
SKU: hon-10514 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopChain slider set, Honda VFR400 NC30
€84.08
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: TYLY-0299
SKU: hon-11392 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30Exhaustset stainless steel alum. silencer round, Kawasaki ZXR250
€506.31
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round aluminium silencer EXSL-0033
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.HP Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifolds<iframe width= 560 height= 315 src= https://www.youtube.com/embed/z5hGKrpQ56c frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0018
SKU: kaw-10018 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopKit, Single Seat Cover Conversion, Ninja 250, Ebony 2008 -12
€192.08
Kit, Single Seat Cover Conversion, Ninja 250, Ebony 2008 -12
TYGA no: 99996-1364-H8
SKU: kaw-10190 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopTyre warmers (set) light weight sports
€321.00 €288.21
All new TYGA Tyre warmers are specifically designed to meet the needs of every racer and track day rider.
Fully adjustable, digital temperature control allows you to set your tyre temperatures to suit every situation with just a press of a button. The remote control box allows for quick and easy monitoring of temperatures.
Tyre warmers are an essential tool for any track excursion. For the racer it allows for lightening first lap action to get the jump on your competitor, and for the track day specialist there’s no more wasted laps trying to get heat into your tyres.
Another great feature is that you can refit the warmers between session and just set at a lower temperature to stop your tyres heat cycling . This gives you more tyre grip for longer, so your tyre won’t go off half way through the day.
These warmers are designed for 250cc, 400cc and Supermoto motorcycles, running the usual 110~120 front tyre, and 150~165 rear tyre.
TYGA tyre warmers are designed to run on 220V, and use a C type plug. Power rating is 550W rear and 450W front.
TYGA no: TWDS-0005Â
SKU: alg-10143 Categories: ALL products, Aprilia, Honda, KTM, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 390, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS250, RVF400RR NC35, Shop, Suzuki, Tyre warmers, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, Yamaha, YZF-R25/R3