Kitaco I-Map, Honda MSX125 GROM
€136.63
KITACO i-Map Fuel Injection Controller
Developed for the Honda MSX125 Grom, giving many choices of fuelling to suit different camshafts, exhausts and big bore engines. And a combination of these upgrades.
The different maps are selected by using DIP switches. Available setting are printed on the unit.
Fitting the i-Map to your MSX Grom requires splicing into the wire harness. Instructions can be seen here:
http://www.kitaco.co.jp/data/product/link/instaling_manual/imap_grom/kitaco_installing_manual_grom_imap.html
There is also the option of a custom map. However, this requires the use of the KITACO PC-USB Interface Cable (available separately).
Mapping :
Pre Installation of 3 Maps.
Remove the Limiter by fuel injection Cut features.
– Map 1 : Rpm limiter at 11000rpm, for stock engine
– Map 2 : Rpm limiter at 12000rpm, for stock engine with aftermarket exhaust
– Map 3 : Rpm limiter at 12000rpm, for 133cc bore up kit and aftermarket exhaust
– Map 4 : Full tuneable map with option USB controller and free Kitaco software. When delivered it is genuine map.
Fit on CE and US models
TYGA no: 763-1432010
SKU: MSX-10309 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopTriple clamp set CNC black, Honda VFR400 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR forks to fit VFR400R, NC30
CNC machined TYGA lower triple clamp for the NC30 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1944
SKU: hon-10618 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Brake lever replacement (straight), universal 1 Tyga
€41.44
Replacement rear brake lever for your TYGA Step Kit. Complete with bearings.
Compatible with STAA-0002, STAA-0003, STAA-0005, STAA-0006. STAA-0010. STAA-0011. STAA-0012
TYGA no: STAL-0003
SKU: alg-10041 Categories: ALL products, Aprilia, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Hawk/Bros 400/650, Honda, Kawasaki, Ninja 400R 2018-, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RS125, RS250, RVF400RR NC35, Shop, Suzuki, VFR400RR NC30Headlight, GP 250 Tyga
€70.35
A small Lightweight unit to discreetly mount on the fairing without spoiling the racing look
Compatible Parts:
Tyga Upper Cowling BPFU-0005 and BPFU-9026
TYGA no: BPLT-0004
SKU: suz-10009 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiSection, Secondary B, R.H Exit, VFR750F, 3rd Gen, 90-93
€107.88
TYGA no: EXPT-8151
SKU: hon-11343 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Section final stainless, Kawasaki ZXR400L
€245.52
Section Final, Stainless, ZXR400L
Final section, used on TYGA-Performance Kawasaki ZXR400L Exhaust Systems:
EXPS-0137
EXPS-0138
EXPS-0139
EXPS-0140
Airbox carbon, A kit, Honda RS250 NX5
€673.59
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPCX-0008
SKU: hon-11311 Categories: ALL products, High performance, RS250R NF5 / NX5, Various partsMirror Blanking Plate, Black, Ninja 400, (pair)
€40.69
Mirror Blanking Plate, Black, Ninja 400, (pair)
Handy mirror blanking plates for your Kawasaki Ninja 400
No need for ugly cable ties on those all important track days. These CNC
machined blanks will secure your cowling and keep you looking stylish.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can
use your standard mirror mounting nuts to secure.
TYGA no: TYLY-1162
SKU: kaw-10101 Categories: ALL products, CNC parts, Kawasaki, Ninja 400R 2018-, Various parts