Carbon rear protector, Honda MSX125 MK1 and Mk2
€271.68
Carbon rear protector, Honda MSX125 MK1 and Mk2
Easy to install, prevents road debris and water flicking up on the rear of your bike and looks way cool!
Not cheap plastic, but a beautiful carbon product.
TYGA no: BPCH-7228
SKU: MSX-10388 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsScreen GP2010, TYGA RGV/RS/NSR
€52.00
Screen clear GP2010, TYGA RGV/RS/NSR
This screen fits the TYGA bodywork.
TYGA no: scre-0084-scre-0085
SKU: alg-10072-alg-10073 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RS250, SuzukiSet pipe full race system WSS300 (no silencer), KTM Duke 390
€650.45
Set, Pipe, Race System, WSS300, No Silencer, KTM 390 Duke
This exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390 Duke. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
Note, this is a system with NO silencer
For complete system with silencer please see EXPS-0142
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
stay, cowl lower rear, ninja 400
€10.49
Stay, Cowl, Lower Rear, Ninja 400
VHM piston (15mm piston pin) RS125 NX4 1995-’10 – RS250 NX5/NXA 1993-’10
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521708 + size
SKU: alg-10400 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsSeal, Crank L., MC28
€9.77
Seal, Crank L., MC28
TYGA no: 91205-KV3-771
SKU: hon-11111 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Lower cowling (GRP), stock shape, NXA RS250R (2001- ’08)
€226.37
VHM cylinder head (2 pieces), Honda RS250 (alg-10174)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Cylnder, front brake assy, Honda NSR250
€259.56
Cylinder, Sub Assy, Front Brake, NSR250
Original OEM Honda Cylinder Sub Assy, Front Brake, fits NSR250 MC18/MC21/MC28
TYGA no: 45510-kv3-315
SKU: hon-10708 Categories: ALL products, Honda, Honda OEM products, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various parts