Carbon engine cover (right), Honda Grom 2021
€93.94
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: BPCC-7548
SKU: msx-10515 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopTop End Rebuild Kit MC18, Cyl. A, Assy.
€293.88
Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘A’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0002A
SKU: hon-10878 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC18Upper cowling street RC211V style, Honda CBR250 MC22
€217.38
This product is part of set BPFX-9225, (the other part being BPFX-9225F). This tank cover is designed to fit over a stock MC22 CBR250RR tank to prevent or cover up accident damage to the tank for example.
VHM cylinder head (2 pieces), RGV250 VJ23
€604.90 €544.41
VHM cylinder head (2 pieces), RGV250 / RS250 (alg-10092)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website, for use on the Suzuki RGV250, and also Aprilia RS250.
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design. Combustion chambers are available in different volumes.
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
Other options:
11.80
12.00 (standard)
12.20
12.40
12.60
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Cowling left red, Honda MSX125 GROM
€23.09
Cowling left red, OEM Honda part
TYGA no: 77225-K26-900ZDÂ
SKU: MSX-10289 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopLower triple clamp CNC Silver, Honda RVF400 -> CBR600 fork
€367.66
Lower Triple Clamp, CNC Silver, CBR600RR forks/NC35 shaft
CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set TYLY-0742, Triple Clamp Set, CNC Silver, CBR600RR Forks to fit NC35.
Lower cowling, Suzuki RGV 250 stock race , assy
€181.67
Lower Cowling (Race, GRP), VJ22, Stock Shape, Assy.
This lower cowling is modelled from the origial stock VJ22 shape and is suitable for all race classes but particulary those where the you need to keep the stock silhouette. Note that this panel splits the fairing into two parts in away to make it easy to remove at the race track. Constructed with epoxy resin and multi layer 200 gram mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
It is to be used with BPFU-9226 upper cowling to complete the fairing. It has an enclosed belly pan for fluid retension to comply with racing classes where this is a requirement.
NOTE: This product is compatible with upper cowling BPFU-9226. Will not fit stock Suzuki upper cowling.
TYGA no: BPFL-9226
SKU: suz-10093 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiBoyesen Dual reeds, Honda NSR125/NSR250
€48.76 €46.52
Boyesen Dual reeds, Cagiva Mito125
Boyesen Power Reeds use a patented dual-stage fiberglass design for more airflow, more air velocity and more overall power.
Boyesen dual-stage power reeds produce a better throttle response right off idle and through the mid-range when compared to the traditional Power Reed setup.
For NSR125 order:
1 set
For NSR250 order:
2 sets
TYGA no: boyesen4
SKU: alg-10377 Categories: ALL products, High performance, High performance, High performance, Honda, NSR125 JC22 1994 - 2003, NSR250, NSR250 MC21, NSR250 MC28, Shop