Piston No mark, MC21/28
€123.97
Piston No mark, MC21/28
TYGA no: 13103-KV3-830
SKU: hon-11180 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28TYGA / Kitaco Power up kit maggot , Honda MSX125 GROM
€702.49 €632.24
TYGA/KITACO Power Up Kit, Maggot Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0042 Set, Pipe, Full Race System, MSX125 Grom, Mot Maggot
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0097
SKU: MSX-10306 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopExhaustset race Stainless steel double carbon Silencers, NC30 NC35
€1,421.35
This exhaust system includes everything you need to replace the stock system. It includes, stainless pipe work, twin carbon silencers, springs, gaskets, silencer clamp, mounting stay and all other mounting hardware.
This system can be used with stock Honda or Tyga bodywork/subframes
Dynograph shows totaly stock 35 compared to modded bike , twin stack tyga system, 1 layer race foam, short stacks, 125 mains front and rear, standard cdi.
TYGA no: EXPS-0003
SKU: hon-10105 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Exhaustset stainless steel alum. silencer round, Kawasaki ZXR250
€506.31
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round aluminium silencer EXSL-0033
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.HP Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifolds<iframe width= 560 height= 315 src= https://www.youtube.com/embed/z5hGKrpQ56c frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0018
SKU: kaw-10018 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopCarbon front fender, Aprilia RSV125 2012 –
€198.78
Front Fender (Carbon), 2012-2014 Aprilia RSV 125
Let your bike stand out from the crowd with this beautiful carbon fibre product.
Racing stepkit black/RED adjustable, Honda Monkey 2018
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Black, Monkey 125
With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.
Notes:
No real brake light provision. If required, we recommend installation of inline pressure switch.
Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included
This rear set cannot be used in a reverse (GP) shift pattern
TYGA no: STAA-1027RED
SKU: msx-10417 Categories: ALL products, CNC parts, Honda, Monkey 125 2018-, Shopcarbon rear hugger STD wheel, VFR400
€308.02
Rear Hugger (Carbon), VFR400R NC30, Assy.
New stylish design prevents water and road debris from the rear wheel reaching the rear shock and other components. Please note this model is designed specifically for the NC30 VFR400R with the stock 150/18 rear tyre fitment. Note we make similar products:
BPCH-7014, NC35 150/17 tyre size
BPCH-7024 NC35 160/17 tyre size
TYGA no: BPCH-7004
SKU: hon-10564 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Fairing stay front Gp-T, Honda VFR400 NC30
€14.29
Fairing Stay, Front, NC30, GP-T, Assy.
This stay mounts to the stock Honda meter stay or TYGA meter stay TYLY-0016 and allows for fitment of the upper fairing BPCU-9034 and BPFU-9034. Supplied complete with plastic bung for quick fairing assembly and removal.
Compatible Parts
TYGA upper cowlings, BPFU-9034 and BPCU-9034.
TYGA no: BPSY-0187
SKU: hon-10589 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, VFR400RR NC30