Kit, Fairing Set, GRP, (Street) MC21, MC28, NSR250V
€920.57
Kit, Fairing Set, GRP, (Street) MC21, MC28, NSR250V
Modelled closely from the front fairing set taken off an actual NSR500V HRC factory machine, this kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but to allow it to fit the NSR250 with correct mounting points and clearances. This fairing set can be installed with both the MC28 and the MC21, (and possibly the MC18, though we have not tried that model).
The set consists of the parts shown below and has a special TYGA designed triple beam LED headlight unit subtly located in what would normally be the front air duct. All special mounting hardware and windscreen is provided. Note, you do not need to change the meter stay for either the MC21 or MC28 models to install this fairing which bolts to the stock meter and rear frame spar side stay and lower stay locations with all hardware provided.
The fairing can be used with stock and all TYGA exhaust systems including use with the specially designed 250V exhaust system EXCS-0047
We recommend installing this fairing set with seat set BPFS-0196 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0195
SKU: hon-11055 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Step, Front Left, Ninja 250R 2008 -12
€7.29
Step, Front Left, Ninja 250R 2008 -12
TYGA no: 34028-1450
SKU: kaw-10216 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopMount body and plate, rear, turn signal RC36-2 RC30 style
€6.20
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPSY-0379
SKU: hon-11548 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, StocklistStay, 2T Oil Tank, Carbon, NSR250 MC21/MC28
€35.12
Stay, 2T Oil Tank, Carbon, NSR250 MC21/MC28
This lightweight carbon 2T oil tank stay replaces the stock item that the bike is supplied with (Honda OE part nr: 35112-KV3-830)
Fits:
Honda NSR250 MC21
Honda NSR250 MC28
TYGA no: BPCC-0064
SKU: hon-11209 Categories: ALL products, Honda, NSR250, NSR250 MC21, NSR250 MC28, Various parts, Various partsCover, Lower Left, Carbon, Assy, VFR750 3rd Gen, 90-93
€153.21
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: BPCX-7049
SKU: hon-11339 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Screen clear TYGA upper fairing, RC125/RC200/RC390
€52.00
Screen, KTM, RC series Upper Fairing
Replacement screen for KTM RC series Upper Cowling sets BPFS-0170 and BPFS-0171
TYGA no: SCRE-0167
SKU: ktm-10100 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200Tank filler cap racing , Suzuki 4 hole
€69.87
Tank Filler Cap, Keyless, Racing Type, Suzuki 4 Hole
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for Suzuki sportsbike models which have 4 bolt mounting arrangement. See also the 3 hole model we supply (If in doubt, remove your existing filler cap to see which bolts actually mount to the tank and which ones are dummy ones for the outer ring only). Suitable for the following models:
- RGV250 VJ21, VJ22 and VJ23
- GSXR600 (1997 – 2003)
- GSXR750 (1996 – 2003)
- GSXR1000 (2001 – 2002)
- GSXR1300 (1999 – 2007)
- GSX600F (1998 – 2001)
- GS600F (2000 – 2001)
- GSF1200/Bandit 1200 (2001 – 2004)
- SV650 (1999 – 2002)
- TL1000S/R (All Years)
See also Suzuki 3 hole pattern
TYGA no: TYLY-0112
SKU: alg-10192 Categories: ALL products, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, Shop, Suzuki, Suzuki RGV250, Tank fillers, Various parts, Various partsExhaustclamp single 4 (4 stroke)
€24.83
Stainless steel clamp. 4 internal diameter with rubber protection for a firm, but friendly grip on your silencer. Includes mounting bolt, nut and washer.
Compatible with Silencers EXSL-0012, EXSL-0013, EXSL-0022 and EXSL-0023.
TYGA no: EXCL-0013
SKU: alg-10065 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30