Seat Cowling, Top, Street, (GRP), Cup Style, KTM RC125, RC200. RC250, RC390
€180.64
Seat Cowling, Top, Street, (GRP), Cup Style, KTM RC125, RC200. RC250, RC390
This is a replacement part for set BPFS-0141. Please note that the following parts are required to complete the set:
BPFT-7331A Seat Cowling, Top
BPFT-7331B Undertray
BPSP-0007 Seat Pad
TYGA no: BPFT-7331A
SKU: ktm-10112 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390License plate holder carbon (Tyga) Gp-T, Honda NSR250 MC21/MC28
€124.52
Registration/License Plate Holder, (Carbon), NSR250 GP-T, Assy.
Made from lightweight carbon fiber, this is supplied complete with license plate light. Note turn signal indicators BPLT-0023 shown below not supplied inclusive but can be ordered seperately from the website store.
This product is to be used with
BPFX-9033 Undertray Street GRP
BPCX-9033 Undertray Street Carbon
and BPFT-9033, BPFT-9133, BPCT-9033 and BPCT-9133 seat cowlings
TYGA no: BPCX-9133Â
SKU: hon-10459 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopHeadlight, GP 250 Tyga
€70.35
A small Lightweight unit to discreetly mount on the fairing without spoiling the racing look
Compatible Parts:
Tyga Upper Cowling BPFU-0005 and BPFU-9026
TYGA no: BPLT-0004
SKU: suz-10009 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiSeat set street T13 with carbon, Honda RVF400 NC35
€1,102.07
This set of bodywork is designed to replace the NC35 stock seat cowling with our T13 seat cowling kit and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the deluxe version without carbon fiber front section, undertray and carbon between air ducts on top and underneath. We also offer a budget version of the same kit, see also BPFS-0117.
TYGA no: BPFS-0118
SKU: hon-10316 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopSilencer carbon round (4 stroke) 2
€348.60
This silencer has polished stainless steel endcaps and a carbon fiber tube to produce an attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2 internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2 inlet.
TYGA no: EXSL-0012
SKU: alg-10029 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Set full race system under belly with long stainless silencer with carbon cap, Honda Monkey 125 2018-
€480.85
Set, Pipe, Full System, Underbelly, Monkey 125, Stainless Oval/Carbon End Cap, Long
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).
Note that once the stock system has been removed from the Monkey, there is an empty space under the seat on the right side. We recommend installing TYGA Performance product BPCC-7142R which has been designed to mirror the left side cover. This will fill in the gap under the seat and complete the transformation. Refer to photos of the exhaust installed for more details.
See also set with the Carbon Side Cover Included : EXPS-0107
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0109) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0110 Stainless, Underbelly, with short silencer
EXPS-0107 Stainless, Underbelly with long Silencer and Carbon side Cover
EXPS-0108 Stainless, Underbelly with short Silencer and Carbon side Cover
Subframe, aluminium TYGA GP seat, RGV250 VJ22
€239.94
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.
TYGA no: TYLY-1028
SKU: suz-10211 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, CNC parts, RGV250 VJ22, Shop, Suzuki, Various partsCarbon belly Pan Race/street , WSS300 TYGA version, KTM RC390
€466.05
Carbon belly Pan Race/street , WSS300 TYGA version, KTM RC390
This carbon belly pan follows the design of the KTM WSS300 but we have modified it so it can be used on the street too! This means that unlike the KTM design, you can install this belly pan with either the sidestand installed or not and use either a street or race gear shift. This belly pan is compatible with our WSS300 exhaust system EXPS-0111 and EXPS-0112.
All fitting hardware included
See table below for compatibility between belly pans and exhaust systems.
Note, we also offer this product in GRP unpainted and in GRP Painted White see the following products for details:
BPFL-7431
BPFL-7431White
Please do note the product photos are showing the unpainted version
TYGA no: BPCL-7431
SKU: ktm-10152 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 390