Lower cowling Gp2010, Honda NSR250 MC21/MC28
€241.68
This product is almost identical to BPFL-9014, just wider lip to match the upper BPFU-9005.
Modelled on the RSW GP race bike design and adapted to fit the NSR250, this lower cowling represents the ultimate in fairing design for the NSR. Keeping the width to an absolute minimum, the design gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and improved design giving excellent finish both inside and out. Weight is now only approx. 1 kg but strength retained using a lip around the edge.
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPFU-9005 but can also be used with BPFU-9012 and BPFU-9022.
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9114
SKU: hon-10237 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon exhaust guard right, KTM RC390
€100.33
Exhaust Guard, Left, Carbon, KTM RC390 Serpent
This is not a simple cover, but a thick and very strong carbon part. Looks cool but also made to guard you, not getting burned by the silencers.
Carbon Exhaust guard for the TYGA serpent exhaust systems. This product is used to when the passenger footpeg assembly has been removed and a TYGA Performance underseat exhaust installed.
Compatible with the following TYGA exhaust systems:
EXPS-0061
EXPS-0062
TYGA no: BPCC-0021R
SKU: ktm-10062 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Exhausts, KTM, RC 390, ShopVHM insert for head, customer specification
€72.95
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AE.....-
SKU: alg-10381 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, RGV250 VJ23, Shop, Various parts, Various parts, VHM productsCarbon seat cowling, stock shape, NXA RS250R (2001- ’08)
€908.01
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Set pipe full system with carbon oval silencer, Honda Monkey 125 2018-
€413.39
Set, Pipe, Full Race System, High Level, Monkey 125, Carbon Oval/Carbon End Cap
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
All fitting hardware included.
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125 compared to the red trace, which is after installing the TYGA Full System set (EXPS-0105)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0104 Moto Maggot High level System for Honda Monkey 125
EXPS-0106 Stainless Oval High level System for Honda Monkey 125
Wheel Bearing Set, Front MC18/21/28
€18.58
Replacement front wheel bearing. OEM quality assured
2x Bearings included
TYGA no: TYPP-0009
SKU: hon-10833 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsIndicator, Front, Right, Ninja 250R 2008 -12
€39.86
Indicator, Front, Right, Ninja 250R 2008 -12
TYGA no: 23037-0116
SKU: kaw-10231 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopExhaustset race Stainless steel motogp Silencer open, NC30 NC35
€1,035.91
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0013.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0011
SKU: hon-10101 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30