Top triple clamp CNC black STREET, KTM RC390, 2014- 21
€486.77
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1831
SKU: ktm-10220 Categories: ALL products, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, Stock list, all modelsSet exhaust with header, race system without silencers
€557.94
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage.
Compatiblity: This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0061, EXPS-0062, EXPS-0091 and EXPS-0092 for systems complete with silencers.
TYGA no: EXPS-0094
SKU: ktm-10095 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopNGK sparkplug R7282-10, short
€58.94
NGK sparkplug R7282-10, “short” (alg-10227)
The short version of the R7376 plugs if clearance is a problem. NOTE: NGK TRS1225 cap required.
Extreme Long Life Laser Iridium Plug, 14mm Thread, 19mm (3/4″) Reach, 13/16″ (20.6mm) Hex Size, Gasket Seat, Resistor, Solid Terminal, Iridium Tipped Fine Wire Center Electrode and Platinum Tipped Ground Electrode, .020″ (0.508mm) Gap.
NGK’s Standard Plugs are Constructed for Longer Life and Optimum Performance.
TYGA no: R7282-10
SKU: alg-10227 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various partsCarbon set, Kawasaki ZX10R 2011-13
€478.52
High quality carbon products, perfect fitment and easy to install. Gives your bike that SBK look
This set comprises the carbon products as shown in the picture.
Enjoy great savings on product prices and shipping when ordering the parts together in a set instead of separately.
Tank filler cap racing , Aprilia
€69.87
Tank Filler Cap, Keyless, Racing Type, Aprilia
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for most Aprilia sportsbike models.
Suitable for the following models:
– Aprilia RS125, 6 holes (early model have 5 holes)
– RS250 All Years
– Aprilia RSV1000 Mile 1998 – 2003
– Aprilia Shiver 750 All Years
– Aprilia Tuono 1000 2003 – 2004
TYGA no: TYLY-0117
SKU: alg-10197 Categories: ALL products, Aprilia, RS125, RS250, Shop, Tank fillers, Various parts, Various partsBelly pan race cup style, KTM RC390 (13-15)
€160.51
Belly Pan, Race, (GRP), Cup Style, KTM RC390
This lightweight belly pan is modeled on the KTM RC390 Cup shape, but being made from high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It is reinforced with carbon/Kevlar at the mounting points and is primed and ready to accept paint.
This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock foot pegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive.
We aim to have this product in stock at all times for immediate shipping. No waiting or worrying about if the parts will arrive in time for your next race.*
Please note, this product fits the 390 only. For the 125 and 200 models, we don’t have information on if it will fit or not.
Update your bike with this great TYGA KTM power part!!
TYGA no: BPFL-7231
SKU: ktm-10029 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 390, ShopWater Hose C, MC28
€12.31
Water Hose C, MC28
TYGA no: 19513-KV3-770
SKU: hon-11161 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Dash Indicator Bulb Harness, MC21
€17.20
This product plugs in line with the wiring connector that connects to the main harness from the left hand handlebar switch and allows the turn signal instrument warning light to function properly when LED turn signals and turn signal relay TELC-0002 are installed. Without this harness, the LED turn signals and turn signal instrument warning light will not flash properly. To install simply unplug the connector at the front of the bike near the master stay and install the TYGA mini harness in line.
This will fit the Honda NSR250 MC21 but also may fit other Honda models.
TYGA no: TYWH-0003
SKU: hon-10747 Categories: ALL products, Honda, NSR250, NSR250 MC21, Various parts