Waterpump rebuild set, Honda NSR250 MC21/MC28
€63.89
All necessary seals and bearing to rebuild your NSR250SP/R waterpump.
Please note that it is necessary to remove the clutch cover to overhaul the waterpump, so a clutch cover gasket may also be required.
TYGA no: NHPS-0008
SKU: hon-10557 Categories: ALL products, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsExhaustset stainless steel alum. silencer round, Kawasaki ZXR250
€506.31
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round aluminium silencer EXSL-0033
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.HP Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifolds<iframe width= 560 height= 315 src= https://www.youtube.com/embed/z5hGKrpQ56c frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0018
SKU: kaw-10018 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopVHM Cyl. Headset Kawasaki KX250 ‘2005 -08
€327.95 €284.25
VHM Cyl. Headset Kawasaki KX250 2005 -08 (alg-10219) AA33075
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
1x cylinder head
1x standard insert (20.60cc)
Optional inserts:
– blind
– 20.20
– 21.00
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33075
SKU: alg-10219 Categories: ALL products, Kawasaki, Kawasaki MX, Motocross, Shop, VHM productsCarbon heel guard suitable Left and right, Yamaha R25/R3
€40.16
Replacement left heel guard for Tyga step kits, see model below. Suitable for left and right side.
STAA-0025
TYGA no: BPCC-0019
SKU: yam-10055 Categories: ALL products, CNC parts, Stock list, all models, Yamaha, YZF-R25/R3Switch assy engine stop , Honda MSX125 GROM
€34.54
Switch Assy. Engine Stop
TYGA no: 35130-K26-901
SKU: MSX-10008 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop, Universal partsCover, Clutch, Ninja 250R 2008 -12
€92.96
Cover, Clutch, Ninja 250R 2008 -12
TYGA no: 14032-0095
SKU: kaw-10222 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopSet powervalves ( 2 pieces), complete CNC billet aluminium, RG125
€230.58
set ( 4 pieces), complete CNC billet aluminium powervalves, RGV250/RS250 (alg-10123)
This set of Power valves is the latest version, and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes.
The set is made of CNC billet aluminium and is special coated.
No more problems with the “power valve pin” and having to buy new ones every 15.000 km.
And the risk that a broken power valve will ruin your engine!!
Now available for an unbeatable price, and FREE SHIPPING all over Europe.
TYGA no: special002
SKU: alg-10379 Categories: ALL products, High performance, RG125, Shop, Suzuki Tags: and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes., And the risk that a broken power valve will ruin your engine!!, Best available in the market., No more problems with the “power valve pin” and having to buy new ones every 15.000 km., The set is made of CNC billet aluminium and is special coated., This set of Power valves is the latest versionSeal, Gear Change Shaft, MC28
€8.00
Seal, Gear Change Shaft, MC28
TYGA no: 91202-444-023
SKU: hon-11115 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28