Set exhaust without header, race system without silencers
€409.54
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage.
Compatiblity: This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.
For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0061, EXPS-0062, EXPS-0091 and EXPS-0092 for systems complete with silencers.
TYGA no: EXPS-0093
SKU: ktm-10094 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopKitaco “plug and play” wire harness for I-Map, Honda MSX125 GROM
€55.41
Kitaco “plug and play” wire harness for I-Map, Honda MSX125 GROM
Must be used with Kitaco I-Map 763-1432010 (MSX-10309)
TYGA no: 763-1432581
SKU: msx-10470 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopBattery Box Cover , Race, GRP, KTM RC390 WSS300
€77.43
Battery Box Cover, Race, GRP, KTM RC390 WSS300
Replacement Battery Box Cover. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPCX-7631UB (Carbon Unpolished)
BPCX-7631B (Carbon Clearcoated)
Carb Service Kit, 14 pieces, Honda NSR250 MC16/18/21
€81.92
Carb Service Kit, 14 pieces, Honda NSR250 MC16, MC18, MC21
LiteTek Carburettor Seal Kit to suit: Honda NSR250 MC16, MC18 and MC21
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-034 Float Bowl Seal, Material: Flourosilicone (Part of Honda kit: 16010-KM9-505)
2x TCG-001 Top Cap Gasket, Material: Gasket Paper (Part of Honda kit: 16010-KM9-505)
2x FB-035 Body O-Ring, Material FKM ((Part of Honda kit: 16010-KM9-505)
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KM9-505)
2x OR-016 O-Ring, Material: Viton FKM (Part of Honda kit: 16010-KM9-505)
2x OR-012 Fuel Pipe O-Ring, Material: FKM (Part of Honda kit: 16010-KM9-505)
2x CS-004 Choke Plunger Cap Material: HNBR (Part of Honda kit: 16046-KV3-950)
Suitable for the following carbs:
MC16: TA10
MC18 ’88: TA20
MC18 ’89: TA21
MC21: TA22
TYGA no: CKA-Honda-MC16,18,21
SKU: alg-10372 Categories: ALL products, Carburettor Service Kits,, Honda, NSR250, NSR250 MC18, NSR250 MC21, Various parts, Various partsCollar/manifold Special , NSR250
€62.38
This is a special replacement part for the NSR250. The manifold has a CNC machined profile, matching the exhaust port exit to allow smooth exhaust gas transition from the cylinder into the expansion chamber. This helps to increase performance from as little as 7,000rpm all the way up to and beyond peak power.
Stephen A’lee of George White Superbikes in the UK independently dyno tested the manifolds on a stock engine MC21, with Stock airbox. The only mods were TYGA pipes.
The red trace shows the above bike using the supplied EXMN-0003 manifold with a peak of 57.2hp.
The blue trace shows the same bike with EXMN-9003 special manifolds fitted. A gain of 1.4hp with no jetting changes.
Compatible with the following TYGA system:
EXCS-0003
EXCS-0005
EXCS-0006
TYGA no: EXMN-9003Â
SKU: hon-10381 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopRacing stepkit adjustable (race), KTM RC125/200/390
€423.04
STAA-0124 Race Only.
Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguard on left and right hanger.
Street/Race shift possible by reversing the gear change arm. No other modification necessary other than adjustment of the link rod.
Peg position is 25/40mm. up and 15/30mm. back*.
Brake light is operated by standard pressure switch, but this may be removed for racing purposes.
No provision for the side stand is provided. For side stand use, please see STAA-0024
Fitting the TYGA Step Kit for the KTM RC390 requires that the swingarm axle be removed from the machine, which can render the vehicle unstable. Having an assistant can be very useful during removal and fitting of the axle.
* Peg position can be adjusted to four positions by 2x M8 bolts attaching the hanger plate to the main plate. After a position change, adjustment of the gear change arm and link rod length will be necessary. For your safety. please ensure all fasteners are tight before use, and we recommend the use of thread locking agent (such as Loctite 242) on the 2x M8 bolts.
&nbsp;<span class= s1 >Update your bike with this great TYGA performance, KTM power part!!</span>
<a href= {{media url= wysiwyg/06-ktm-rc-series-sk-online-9885a093.pdf }} target= _self >Click here for fitting instructions</a>
<style type= text/css ><!–
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px ‘Helvetica Neue’; -webkit-text-stroke: #000000}
span.s1 {font-kerning: none}
–></style>
TYGA no: STAA-0124
SKU: ktm-10037 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, ShopChoke Cable, RC36-2, RC30 Style
€11.29
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYTO-0033
SKU: hon-11521 Categories: ALL products, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsPassenger seat cover yellow/flad black, Honda MSX125 GROM
€187.90 €132.00
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in Y-217 Queen Bee Yellow with flat black number board as shown in the photos. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
Note: this product is painted to match Y-217 Queen Bee Yellow. Note we also have a similar product BPFX-7128 YM/F, (Y-216 Marigold Yellow) which matches the colour of the MSX125 Grom sold in some markets. Be sure to confirm the colour of your bike before ordering.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 Y/F
SKU: MSX-10153 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, Shop