Cowling center red, Honda MSX125 GROM
€17.03
Cowling centre, OEM Honda part
TYGA no: 77230-K26-900ZCÂ
SKU: MSX-10287 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopTriple Clamp Set, 3D, CNC Silver, NC35 Forks to fit MC21/MC28
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3305
SKU: hon-11270 Categories: 4 stroke exhaust sets, ALL products, CNC parts, CNC parts, Exhausts, Honda, NSR250 MC21, NSR250 MC28, Shop, SilencersSilencer stainless round, WSS300 (race) system, KTM RC390
€406.03
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0109
SKU: ktm-10200 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon exhauststay right, Suzuki RGV 250
€29.88
Carbon Exhaust hanger stay for VJ22 RGV250. This product is used to secure the right side silencer for all types of TYGA exhaust systems for the VJ22 . It can be used with or without the passenger footpeg assembly so it is suitable for both street and race bikes.
Compatible with the following TYGA exhaust systems:
EXCS-0009
EXCS-0010
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCC-0012R
SKU: suz-10005 Categories: ALL products, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, Suzuki, Various partsTyga Step Kit Replacement Bush, (Pair), 30mm
€16.07
This replacement part fits to the Tyga step kit on the KTM RC390 etc.
TYGA no: STHB-0030
SKU: ktm-10125 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsSet full race system with stainless silencers with carbon cap, Kawazaki Z125 2016-
€536.29
Set, Pipe, Full Race System, Kawa Z125, Stainless Oval/Carbon End Cap
This full race system has been specifically designed for the Z125 to maximise performance and looks. The header section has a special bulge to reduce the sound level, without sacrificing power. Complete with Lambda boss for 100% compatability with the stock electronics.
The final silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decbel killer for noise reduction.
Performance and Dynograph
The green trace shows the 100% standard Kawasaki Z125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0063)
A useful gain all through the range, with potential for other engine mods.
Kawasaki Z125 Sound Level Test
Test Method: SAE J2825 Static sound level test for motorcycles
Equipment: DIGICON IEC-651 TYPE II sound meter
RPM TYGA System – No DBK TYGA System – DBK Installed OEM System
Idle 82 73 69
4000 92 84 81
5000 93 85 86
6000 95 87 91
TYGA no: EXPS-0063
SKU: kaw-10055 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Shop, Z125 2016-Undertray TYGA, Aprilia RS250
€53.48
his is the all GRP undertray used in the GP style seat cowling kits for the Aprilia RS-250 kits BPFS-1102
This product is suitable as a replacement in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the Aprilia RS-250
To be used with seat cowling BPFT-9030 and BPCT-9030
TYGA no: BPFX-9030
SKU: apr-10104 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopCarbon stay R lower cowl, Honda CBR250RR MC22
€35.77
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCC-7220
SKU: hon-11465 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, Silencers