Carbon fairing stay side 77mm (pair), Honda NSR250 MC21/MC28
€82.47
Fairing Stay, Side, Pair, Carbon
Designed to replaced fixed side stays these lightweight carbon fiber stays are supplied with nylon bungs and ‘R’ clips, for quick release. This product can also be used with many race fairings such as the TYGA Honda RSW and GP250 style or similar applications. See drawing for dimensions. Also see similar product BPSY-0143 Assy.
Dimensions:
BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.
BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.
Compatible products:
TYGA upper cowlings, BPFU-0005, BPFU-9005, BPFU-9014
TYGA no: BPSY-0143
SKU: hon-10565 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsCarbon front fender, Honda Hawk/Bros
€153.21
Front Fender, Carbon, Hawk/Bros
This carbon version of the stock front fender will enhance the beauty of your Hawk and make it stand out from the crowd!
TYGA no: BPCF-7066
SKU: hon-11166 Categories: ALL products, By model, Hawk/Bros 400/650, Honda, ShopIgnition rotor (track only), Honda NSR250 MC21/MC28
€203.15
HRC style total loss ignition rotor for the NSR250 MC28.
Simply remove the standard rotor and generator system and fit this super light weight rotor.
Timing position is the same as standard MC28 rotor, but this can of course be adjusted by offset woodruff keys.
For use on NSR250 MC21 an offset woodruff key (2 degree advanced) must be used.
Please note that this rotor is for racing only and cannot be used on the street. It’s use requires that the battery be fully charged and in tip top condition as the charging system is removed and performance relies solely on the battery condition.
TYGA no: TPER-0040
SKU: hon-10382 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopKitaco “plug and play” wire harness for I-Map, Honda MSX125 GROM
€55.41
Kitaco “plug and play” wire harness for I-Map, Honda MSX125 GROM
Must be used with Kitaco I-Map 763-1432010 (MSX-10309)
TYGA no: 763-1432581
SKU: msx-10470 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopSilencer, Carbon, Oval/Carbon End Cap, 44.5mm., CNC/Spring Mount, No Fittings
€436.82
Silencer, Carbon, Oval/Carbon End Cap, 44.5 mm, CNC/Spring Mount, No Fittings.
The Dimensions of this silencer are as follows:
I.D. 44.5mm (slip-on section) O.D. 122mm x 90mm(diameter of stainless tube) L. 320mm Suitable for Ninja 250/300 and medium capacity four stroke motorcycles.
Brake reservoir cap front silver , Honda MSX125 GROM
€24.38
Brake Reservoir Cap, Front, CNC, Grey, genuine Honda part.
TYGA no: APK2645513TA
SKU: MSX-10036 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsBelly pan (GRP/carbon) Yellow, Honda MSX125 GROM
€309.98 €217.00
Belly Pan, (GRP/Carbon), MSX125, painted Y-217 Queen Bee Yellow to match your bike. Bling up your grom with this cool component.
Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product from GRP, see BPFL-7128
Note: this product is painted to match Y-217 Queen Bee Yellow. Note we also have a similar product BPCL-7228 YM, (Y-216 Marigold Yellow) which matches the colour of the MSX125 Grom sold in some markets. Be sure to confirm the colour of your bike before ordering.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href=”{{media url=”wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf”}}” target=”_self”>Click here for PDF</a></p>
TYGA no: Â BPCL-7228 Y
SKU: MSX-10195 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopTankcover front RVF, NC35
€92.82
This is a GRP reproduction of the stock OEM front tank cover for the NC35. It can be used either with a stock tank in the normal way or if ordered with BPFX-9201 to make a full tank cover for the NC35.
TYGA no: BPFX-9101
SKU: hon-10143 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop