Set exhausts side by side stainless steel, Honda NSR250 MC18
€962.68
This would the best looking exhaust we ever made, and it performance to!
Tyga Performance is probably the only company offering stainless steel expansion chambers for the MC18. These exquisitely crafted pipes are designed to give maximum power, while at the same time to give sufficient clearance for the MC18 swing arm; quite a demanding feat but one achieved by the curving the header design. This system has the two silencers exiting, not unlike the 1989 MC18 stock system, in the high level left and right position and the silencer clamps are provided which mount onto the stock 1989 silencer mounting brackets.
For the 1988 MC18, this system can be installed but requires removal of the passenger footpeg hangers and replaced with special TYGA silencer brackets (not included in this set) So for 1988 owners, remember to order 2 x BPSY-0130
Parts included with this product:
1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts
2 x manifolds
2 x mounting flanges
4 x mounting springs
1 x Radiator lower mounting stay
1 x lower cowling rear mounting stay
Not included are the silencers which you need to select from our choice of aluminium, carbon and carbon/Kevlar types. Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set.
TYGA no: EXCS-0003Â
SKU: hon-10357 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, NSR250 MC18, ShopUpper Cowling (GRP), NX5 RS250R (1995 NSR250 Style)
€303.70
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPFU-9336
SKU: hon-10982 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopBracket rear brake, 84mm Brembo conversion Silver, Honda MSX125 GROM
€100.41
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, MSX125 Grom
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1093)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-0093
SKU: MSX-10079 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopExhaust section, stainless steel, Honda MSX125 GROM
€103.66
Section to be used with Moto Maggot EXSL-8013 as part of system EXPS-0034
TYGA no: EXPT-0034
SKU: MSX-10003 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, ShopCarbon Front fender, Yamaha R1 2002-8
€180.80
Lightweight carbon fibre direct replacement for Yamaha OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
TYGA no: BPCF-7002
SKU: yam-10007 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8TYGA step kit replacement sidestand spacer, KTM RC390
€18.78
Tyga Step Kit Replacement Sidestand Spacer, KTM RC390
TYGA no: STAH-0047C
SKU: ktm-10075 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RC390 2022-Exhaust hanger stay left, Aprilia RS250
€65.59
moet nog 40
TYGA no: TYLY-0052
SKU: apr-10001 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, RS250, ShopCarbon chain guard, Cagiva Mito125/EV/SP525
€95.39
Carbon chain guard, Cagiva Mito125/EV/SP525
This carbon chain guard replaces the stock plastic part which, after 20 years, is starting to look a bit faded and battered on most Mito’s.
By replacing it with this beautiful carbon part, your swing arm will look fresh and tidy!