Set full race system high level with carbon silencer with carbon cap, Honda MSX125SF GROM
€519.40
Set, Pipe, Full Race System, High Level, MSX125SF Grom, Carbon Oval/Carbon End Cap. Second Generation.
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2100 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom
EXPS-0067 Stainless Oval High level System for 2016 MSX125SF second generation Grom
Note: Some modification of the stock Honda rear hugger (no modification required if using the hugger BPCH-7028 and BPCH-7128) and stock Honda rear fender is necessary to install this system
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0066
SKU: MSX-10339 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, Shopkit seat set race complete set, Ninja 400
€280.92
Kit, Seat Set, (Race GRP) Ninja 400
Complete Race Seat Set
Consist of Seat Cowling BPFT-7040(p) and Undertray BPFX-7040
See also complete Fairing Set BPFS-0175
TYGA no: BPFS-0176
SKU: kaw-10135 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Racing Step Kit, VJ23 RGV250
€355.59
VHM cylinder head (2 pieces), RGV250 / RS250 (alg-10092)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website, for use on the Suzuki RGV250, and also Aprilia RS250.
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design. Combustion chambers are available in different volumes.
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
Other options:
11.80
12.00 (standard)
12.20
12.40
12.60
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Silencer stainless steel Motogp style (4 stroke) 43mm maggot
€194.80
Maggot silencer with 43 mm. inside diameter. Same dimensions as Ninja 250/300 model but without mounting lug. Includes silencer clamp, mounting springs and spring hooks to weld on existing exhaust system tail pipe.
Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application.Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.
All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.
 
<a title= Maggot 43mm href= {{media url= wysiwyg/02-maggot-exsl-4013-43mm-eaf5c71d.PDF }} target= _self >Click here for PDF</a>
&nbsp;
&nbsp;
&nbsp;
Turn signal relay, 2 pin
€9.98
Electronically speed controlled flasher relay especially designed to be used with LED turn signals. This unit will flash at the correct speed regardless of the wattage of the turn signals so it can be used with stock fronts and LED rears, all LEDs or even all stock. We’ve tested these 12 volt 21Watt front bulbs with our BPLT-0023 mini LED turn signals and they perform perfectly.
Check if your bike has a 2 pin Relay!
TYGA no: TELC-0001
SKU: alg-10122 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Ducati, Duke 125/200 2012- 16, Duke 390 2012-16, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Kawasaki, KSR110 2005- 10, KTM, Mito 125, Monster, MSX125 2013 - 2015, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RSV125, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250CExhaust Hanger Stay, Pair, Carbon, RGV250, VJ23
€108.42
Rear Hugger/Chain Guard (Carbon), VJ23 RGV250
The VJ23 RGV250 is the only RGV250 model which does not have a rear hugger as standard and as a result, all the road filth and rain tends to collect around the rear shock and under side of the seat cowling. TYGA Performance have developed this carbon hugger as a solution to the dirt issue while making the swing arm/rear wheel part of the bike more attractive. Designed to fit onto the contour of the VJ23 swing arm’s fabrication and lock into position by a rub underneath, the TYGA hugger incorporates the rear chain guard too, using the chain guard’s mounting holes on the left to hold it securely in place. On the right side, it is held on by a cable tie through the rear brake line guide and at the front by an M4 bolt which is requires drilling and tapping of the swing arm by the customer to install this product.
IMPORTANT, note that due to the VJ23 never having the option for a rear hugger, there is no position provided on the swing arm to mount the hugger at the front and it is necessary to drill and tap an M4 hole in the swing arm and use a cable tie to provide a good level of support for the hugger. See photos 7 and 8 for details on what is required to install this product.
Complete with all fitting hardware.
Triple clamp CNC black, KTM RC125/RC200/RC390 2014 – 23
€196.92
Top Triple Clamp, CNC Black, KTM RC Series
CNC machined TYGA top triple clamp with detachable ignition lock holder for your KTM RC Series motorcycle.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
This product can be bought as a set TYLY-1073 with detachable ignition switch holder TYLY-1173.
Update your bike with this great TYGA performance, KTM power part!!
TYGA no: TYLY-1073(p)
SKU: ktm-10071 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RC390 2022-, ShopScreen Clear, NSR250 MC18 ’89
€52.00
Screen Clear, 1989 NSR250 MC18, Kit.
1989 NSR250 MC18 screen clear
TYGA no: SCRE-0011
SKU: hon-10922 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, NSR250 MC18, Shop, Various parts