Silencer, Stainless, Oval, Carbon End Cap, Ninja 400, Assy
€292.66
Silencer, Stainless, Oval, Carbon End Cap, Ninja 400, Assy
Silencer with 43 mm. inside diameter. Please note this is a replacement for the 2018- Ninja 250/300 slip on system ( EXPS-0101)
TYGA no: EXSL-0072
SKU: kaw-10092 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Kawasaki, Ninja 400R 2018-Brake reservoir cap front silver , Honda MSX125 GROM
€24.38
Brake Reservoir Cap, Front, CNC, Grey, genuine Honda part.
TYGA no: APK2645513TA
SKU: MSX-10036 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsCarb Service Kit A, 20 pieces, Honda CB400 Super Four NC31
€40.95
Carb Service Kit A, 20 pieces, Honda CB400 Super Four NC31
LiteTek Carburettor Seal Kit to suit
Honda CB400 Super Four NC31
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-012 Float Bowl Ring, Material: Flourosilicone, (Part of Honda Assembly Part No. 16010-MY9-000)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MY9-000)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MY9-000)
4x OR-006 Needle O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MY9-000)
Carbon ignitioncap, Aprilia RS125
€117.41
This lightweight carbon cover simply slips on over the nasty looking plastic one. It can be secured in place by silicone sealant or double sided tape
TYGA no: BPCC-7107
SKU: apr-10011 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopSection header stainless WSS300 race system, KTM RC390
€226.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0077
SKU: ktm-10135 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsVHM Cyl. Headset KTM 125SX ’07-
€271.95 €256.04
VHM Cyl. Headset KTM 125SX ’07-> (alg-10205) AA33097VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.60cc)Optional inserts:– blind– 11.20– 11.40– 11.80– 12.00This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33097
SKU: alg-10205 Categories: ALL products, KTM, KTM MX, Motocross, Shop, VHM productsSection, Intermediate, Stainless, Yamaha R25/R3
€141.32
Section, Intermediate, Stainless, Yamaha YZF-R25 and YZF-R3
Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.
Step kit replacement left side assy, KTM RC125/200/390
€40.16
Tyga Step Kit Replacement left Side Hanger, (Adj.) KTM RC125/200/390 Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.
TYGA no: STAH-0047B
SKU: KTM-10089 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390