Pillion seat cover “Black”, KTM RC390 2022 –
€122.50
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFX-7731black
SKU: ktm-10210 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsSwing Arm, Cover Right, (Carbon) NSR250 MC21
€126.42
Swing Arm Cover, Pair, (Carbon) Honda NSR250 MC21
These lightweight carbon covers fit over the stock swing arm on the NSR250 MC21.
They are designed to protect against scratches and gives that NSR GP250 look to your bike! Fit in minutes.
Screen OEM, Ninja 250R/300R 2013 -18
€52.00
Screen OEM, Ninja 250R/300R 2013 -18
TYGA no: 39154-0318
SKU: kaw-10163 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopShroud left Blue, Honda MSX125 GROM
€32.45
Shroud, L, Blu
TYGA no: 83490-K26-900ZE
SKU: MSX-10225 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopBelly pan (GRP) unpainted, Honda MSX125 GROM
€149.20
Belly Pan, (GRP), MSX125, unpainted. Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with painted and with carbon, see BPFL-7128 W/R/Y/B and BPCL-7228 shown in the photos
Important. This product needs painting and is only provided with a PU primer finish
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>
TYGA no: Â BPFL-7128
SKU: MSX-10188 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCarbon front fender, CBR500
€187.52
Carbon direct replacement for OEM Honda item. Pre drilled for easy fitting. Compatible with:
CBR500F
CBR500X
CBR500R
Update your bike with this great carbon product, direct replacement of the original part
Triple clamp set CNC black, Honda NSR250 MC28 to fit CBR600 fork
€602.26
Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC28
CNC machined TYGA lower triple clamp for the MC28 NSR250 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ingnition switch/ lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1941
SKU: hon-10558 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28, ShopRC Valve Flap L., NSR150SP
€40.35
RC Valve Flap L., NSR150SP
TYGA no: 14203-KW6-840
SKU: hon-11189 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR150SP