Top triple clamp CNC black, KTM RC390, 2022-
€222.31
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1273
SKU: ktm-10208 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCowling Right Blue, Honda MSX125 GROM
€23.35
Cowl, L., RR., Blue
TYGA no: 77215-K26-900ZE
SKU: MSX-10228 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon engine covers pair 2016 – , KTM Duke / RC390
€240.76
Carbon engine covers pair 2016 – ’20, KTM Duke – RC390
This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Note: This product does not fit the 2014-2015 model KTM RC390 due to a revised design of the left side engine cover.
2014-2015 Model: Left engine case, KTM part number: 90230002133 (BPCC-7331L fits). Choose BPCC-7331 not BPCC-7531 if you would like to order set of left and right cases.
2016-2017 Model Left engine case, KTM part number: 93730002000 (BPCC-7531L fits). Choose BPCC-7531 not BPCC-7331 if you would like to order set of left and right cases.
TYGA no: BPCC-7531
SKU: ktm-10081 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, CNC parts, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 390, RC390 2022-Seat Cowling (GRP), NX5 RS250R (early model style)
€290.93
Seat Cowling Race (GRP) NX5 RS250R (1993 Style) (BPFT-9236)
The seat cowling is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock subframe as far as we can tell. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Please see our range of NX5 bodywork section for sets that use this product and similar items.
TYGA no: BPFT-9236
SKU: hon-10941 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSeal, Crank Right, MC28
€39.58
Seal, Crank Right, MC28
TYGA no: 91203-KV3-681
SKU: hon-11113 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Cowling left white, Honda MSX125 GROM
€23.35
Cowling left White, OEM Honda part
TYGA no: 77225-K26-900ZB
SKU: MSX-10067 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopCarbon fuel tank, Honda NSR250 MC28
€1,444.49
Fuel Tank, Carbon, NSR250, MC28
Top quality reproduction of the steel MC28 fuel tank in carbon fiber. This product is a direct replacement for the stock fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
This product can be used on all MC28 model NSR250s and MC21 models if fitted with an MC28 compatible seat cowling. This means that if you have an MC21 and would like to install this tank, it is possible by installation with any of the following TYGA seat cowling sets:
BPFS-0003
BPFS-0004
BPFS-0032
BPFS-0059
BPFS-0060
BPFS-0129
BPFS-0130
BPFS-0131
TYGA no: BPCG-0001
SKU: hon-10682 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, ShopKit upper cowling grp street, KTM RC125/200/390
€843.61
Kit, Upper Cowling, Street, (GRP) KTM RC125/200/250/390
This TYGA designed upper cowling kit replaces the ugly stock set up with attractive sleek styling.
As well as a cosmetic enhancement, this kit incorporates modern LED headlights with two units on dip, two on full beam and two side lights to give excellent illumination at night and visibility of your bike to other road users during the day.
In addition, the design allows for wider spacing of the rear view mirrors for great safety and lighter weight for better performance.
The components are carefully designed to reduce weight with the subframe being made from lightweight tubular aluminium alloy and the main fairing made from either carbon fiber or glass reinforced plastic for strength and lightweight.
Note, at the moment we don’t have this part in stock. The sets are now in production and will take about 5 weeks when we deliver the first sets.
That’s why we now offer it for pre order price, you get an extra discount.
TYGA no: BPFS-0171
SKU: ktm-10096 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, Shop