Set, Pipe, Full Race System, Ninja 250 2008-12, Moto Maggot Silencer
€491.32
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)
This system is supplied with a Moto Maggot silencer EXSL-4013
Independent Review:
TYGA Ninja 250R Race Exhaust System Dyno Results
October 29th, 2010 Adam
2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock Exhaust
I’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!
Ninja 250R Dyno results are for the following runs:
Black: Stock Exhaust (no modifications whatsoever)
Blue: Stock Exhaust (snorkel removed)
Red: TYGA Round Aluminum Race System (snorkel removed)
Note: Carbs were not jetted. Fuel mixture screws were not adjusted.
HP Gains:
1) Remove snorkel ( 1.5HP) == 28.1HP!
2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!
Total: 5.7HP ( 4.2HP from TYGA exhaust!)
Weight Comparison (lbs):
Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbs
TYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbs
TYGA no: EXPS-0032
SKU: kaw-10086 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12Triple Clamp Set, 3D, CNC Silver, CBR600RR Forks to fit MC18
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3302
SKU: hon-11268 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsSidehanger right TYGA, Honda RS250 NX5
€54.77
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.
TYGA no: STAH-0044
SKU: hon-10691 Categories: ALL products, By model, By product, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopLock Washer, Headstock Nut, MC28
€7.18
Lock Washer, Headstock Nut, MC28
TYGA no: 90506-425-830
SKU: hon-11125 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Holder, Fork, 52mm
€35.93
This 52mm fork holding tool is very useful when servicing 41mm forks. Now there’s no need for alloy jaws in your vice and less chance of crushing a fork leg.
This handy tool just slips over the stanchion, secures with an M8 cap head bolt and then can be held firmly in the vice while you painlessly perform your maintenance.
Manufactured from 6063 aluminium to ensure no damage to your motorcycle parts in normal use
Belly pan (GRP) RED, Honda MSX125 GROM
€225.09 €158.00
Belly Pan, (GRP), MSX125, painted valentine red to match your bike. Bling up your grom with this cool component.
Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with carbon, see BPCL-7228 shown in photos of belly pan fitted to bike.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href=”{{media url=”wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf”}}” target=”_self”>Click here for PDF</a></p>
TYGA no: Â BPFL-7128 R
SKU: MSX-10187 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopScreen clear stock shape, Suzuki RGV 250 VJ21
€52.00
Screen clear stock shape, Suzuki RGV 250 VJ21
TYGA no: SCRE-0120
SKU: suz-10157 Categories: ALL products, Bodywork and carbon, RGV250 VJ21, Shop, Suzuki, Various partsScreen MiniRacerXtreme, Honda MSX125 GROM
€52.00
Screen MiniRacerXtreme, Honda MSX125 GROM
This screen fits the TYGA bodywork
TYGA no: SCRE-0163- SCRE-0164
SKU: msx-10260 - msx-10261 Categories: ALL products, Aprilia, Bodywork, Honda, MRX, MSX125 2013 - 2015