Carbon exhauststay left, Suzuki RGV 250
€29.88
Carbon Exhaust hanger stay for RGV250. This product is used to secure the left side silencer for systems with a side by side silencer. It can be used with or without the passenger footpeg assembly so it is suitable for both street and race bikes
Compatible with the following TYGA exhaust systems:
EXCS-0009
EXCS-0014
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCC-0012L
SKU: suz-10004 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiFairing stay side pair , Honda RVF400 NC35
€33.28
Fairing Stay, Side, Pair, RVF400 NC35, GP-T, Assy.
Made in stainless steel designed specifically for the RVF400 NC35 GP-T fairing, these side stays fit to the frame in the same position as the stock Honda stays and allow for a little more adjustment. They are supplied with bushes so when the stays and bushes are used together, they provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or stock application.
TYGA no: BPSY-0190
SKU: hon-10585 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Handle bar set, Honda RS250 NXA
€216.82
Handlebar Set, Silver, NXA
Design based on the genuine HRC bar clamps as used on the NXA. Made from 6061-T6 for strength and durability, ideal for replacements for your Honda RS250 or for building a special. Designed for 50mm/52mm clamping surface, with an angle of the bars set at 17° This is the same as stock HRC clamps and is more radical than the usual <10° which most of our other handle bar clamps are set at.
TYGA no: TYLY-0359
SKU: hon-11212 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopSet exhaust, race system double stainless oval/carbon cap , KTM RC390 2014 – ’21
€1,107.21
Set, Pipe, Race System, RC390, Stainless Oval/Carbon End Cap.Update your bike with this great TYGA performance, KTM power part!!Model 2017This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with decibel killers for noise reduction.CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.Please also see EXPS-0092 for similar system qith Moto Maggot silencers.CustomizationFeel free to request this product with no TYGA logo. we understand not everyone wants their bike to be covered with graphcs and won’t be offended. Simply put in the comment box with your order: ‘Please supply with no TYGA logo’. Just let us know your requirements; we want to provide the best possible product for your applicationPerformance and DynographPlease refer to dynographA) All Standard.B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition mapC) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition mapVery useful gains especially in the mid range for both B) and C), for much stronger acceleration.The silencer was full bore. No decibel killer used.NEW! for the 2017 model we added the EXPT-0003:Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.Compatible with the following exhausts:Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0091
SKU: ktm-10093 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopBracket front brake CNC silver 84mm Brembo, Honda MSX125 GROM
€33.06
Bracket, Front Brake, 84 mm Brembo Conversion, Silver, MSX125 Grom
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1098)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
Photos show black version installed on bike
Only suitable for the non ABS models
TYGA no: TYLY-0098
SKU: MSX-10127 Categories: ALL products, By model, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopKit, GRP, Complete bodywork set with Fuel Tank and Front Fender, painted Repsol, MC21, MC28 NSR250V
€3,668.44
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: BPFS-250VREPSOL
SKU: hon-11411 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopTuning set CNC silver GROM
€62.96
Tuning set CNC silver GROM (msx-10158)
A set contains:
2x clutch – brake mount clamp
1x Brake reservoir cap
1x Clutch adjuster
TYGA no: special012
SKU: MSX-10158 Categories: ALL products, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsTYGA bike dust cover Black/red “CBR250RR”
€68.13
TYGA Bike Dust Cover, Red, HRC (street)
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
See also TMER-0137 for the “Race” version of this TYGA bike dust cover for (race) bikes with no mirrors
Also available in Black see TMER-0123 and TMER-0124
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0122
SKU: hon-11072 Categories: ALL products, Bike covers, CBR250RR 2017, CBR250RR MC22, Honda, Merchandise, Shop, Universal parts