Bar end weight (pair), Honda CBR250RR MC22
€21.46
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0322
SKU: hon-11468 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersSet tube, ram air connectors, Honda RS250 NX5
€51.55
Set Tube, Ram Air Connector, RS250 NX5 (pair)
Direct replacement parts for OEM HRC part: 17520-NX5-770
3D Printed in flexible TPU. These tubes are a simple replacement for the no longer available rubber tubes from HRC.
TYGA no: TPER-0036
SKU: hon-10916 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsSilencer, Carbon/Kevlar, Two Stroke, 70mm, Assy
€151.18
Silencer, Carbon/Kevlar, Two Stroke, 70mm, Assy
This high quality lightweight silencer is made from CNC machine entry and pressed stainless steel exit cap joined by a carbon/Kevlar fiber tube. It is designed very similar to the ones we make for the NSR500V but is a direct fitment for our 250V style chambers and provides the same power characteristics as our other two stroke silencers. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
"Note this product is intended to be used with our exhaust chambers (EXCS-0047) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber."
Compatible Products:
Tyga Performance Two Stroke chambers sets EXCS-0047. (We will be adding more to this list as we get the chance to install with other previous TYGA exhaust systems, Feel free to request advice by email about suitable applications) Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0083 carbon
TYGA no: EXSL-0084
SKU: hon-11047 Categories: ALL products, Exhausts, High performance, Honda, NSR250, NSR250 MC28Carbon meter cover black, MC21/MC22/NC35/NC29/SC28
€40.76
Carbon Meter Cover MC21, MC22, NC35, NC29, SC28
Attractive carbon cover for MC21 meter assembly.
For fitment, simply remove adhesive backing and pop it on over the three foam retaining buttons.
Fits?Honda models as follows: CBR900RRN/RRP/RRR, RVF400 NC35, CBR400 NC29, CBR250 MC22.
TYGA no: BPCC-0004
SKU: hon-10377 Categories: ALL products, Bodywork and carbon, Carbon, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR125 JC22 1994 - 2003, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various partsScreen OEM, Ninja 250R/300R 2013 -18
€52.00
Screen OEM, Ninja 250R/300R 2013 -18
TYGA no: 39154-0318
SKU: kaw-10163 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopClutch Lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
€54.27
Clutch Lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
CNC machined from solid billet, these flip up type levers are made to a very high standard.
Not to much bling, and the orange color matches your KTM RC series good quality and adjustable in reach and length.
Fits’s in minutes and changes the appearance of your KTM!
TYGA no: LEVC-7003
SKU: ktm-10077 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, RC390 2022-Carbon frame/fairing (pair), NC35
€90.11
Carbon in fills pieces to replace the stock Honda plastic ones. Not suitable for Tyga RC211V style body kits.
Great carbon products, perfect fitment and give your bike that HRC factory look.
TYGA no: BPCC-0008
SKU: hon-10152 Categories: ALL products, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopUpper cowling race left, Ninja 400
€152.01
Upper Cowling, Right, (Race GRP), Ninja 400
Replacment Left upper Cowling for TYGA Race Bodywork kit BPFS-0175
TYGA no: BPFU-7040R
SKU: kaw-10142 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-