Inner cowling GRP stock “painted Red” , NSR250 MC21/MC28
€156.17
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: BPFC-0040RED
SKU: hon-11362 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, ShopClutch adjuster, Honda MSX125 GROM
€25.00
Top clamp nut in colour. Light weight and good looking. Anodised for a long lasting finish. available in a variety of other colours. See photos.
TYGA no: H073-A8Z1-0091BLACKÂ -
SKU: MSX-10160-msx-10164 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020Fork cap kit, Kawasaki ZXR400L
€317.71
After 20 years or so of hard use, many ZXR’s have damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any ZXR400 restoration and install exactly the same as the original parts.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
Aluminium wheel spacer kit orange, KTM Duke – RC125/RC200/RC390
€116.96
Wheel, Aluminium Spacer, Bearing, and Seal Kit, (Orange) KTM RC and Duke Series
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: We also offer a similar product in silver and kits for the wheel spacers only.
TYGA no: TPER-0003ORANGE
SKU: ktm-10078 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, RC 125/200, RC 390Tank filler cap racing , KTM/Triumph
€69.87
Tank Filler Cap, Keyless, Racing Type, KTM/Triumph
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for most KTM/Triumph sportsbike models.
Suitable for the following models:
Triumph
– Triumph Daytona 600/650 All Years
– Triumph Daytona 675 2006 – 2008
– Triumph Daytona 955i 1998 – 2000
– Triumph Daytona T595 All Years
– Triumph Speed Four 2002 – 2006
– Triumph Speed Triple 1050 2005 – 2009
– Triumph Speed Triple 955i All Years
– Triumph Sprint 1050 2005 – Present
– Triumph Sprint GT All Years-
– Triumph Street Triple 2007 – 2008
– Triumph Street Triple 675 2007 – 2008
– Triumph Street Triple R 2007 – 2008
– Triumph Tiger 1050 2006 – Present
– Triumph Tiger 800 All Years
– Triumph Tiger 800XC All Years
– Triumph TT600 All Years
KTM
– KTM Super Duke 990/990R All Years
– KTM Adventure 950 S All Years
– KTM Adventure 990 S/R All Years
Gear 2nd drive z=16 no.2, RGV250/RS250
€92.10
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Set, Pipe, Full Race System, Ninja 300R, Round Stainless Silencer
€557.94
2013-2017, Set, Pipe, Full Race System, Ninja 300R, Round Stainless Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 300 when used with the TYGA system*. Made in stainless steel with spring mounted round Stainless silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an round Stainless silencer EXSL-0064
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 300 Exhaust pipe sections and silencers.
TYGA no: EXPS-0098
SKU: kaw-10070 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Front Fork Preload Adjusters (Pair), ninja 400
€200.55
Front Fork Preload Adjusters, Pair, Ninja 400
These fully functional preload adjusters replace the blank end caps on the stock Ninja 400 front suspension. These caps allow the rider to increase the amount of preload on the internal springs, allowing for a better set up for your riding style or conditions. Essential for spirited riding through the twisties or track days and racing.
This modification allows preload to be increased from the stock setting by 12mm. The minimum setting gives the same preload as stock.
Supplied in red and blue anodised finish, these adjusters are as beautiful as they are functional.
TYGA no: TYLY-0099k
SKU: kaw-10100 Categories: ALL products, Exhausts, Kawasaki, Ninja 400R 2018-, Various parts