Carbon seat set street, Aprilia RS250
€1,203.58
Due to popular demand, our GP seat cowling kit is now available in carbon. These panels are both lighter and stronger than GRP. Finshed in three layers of tough clear coat to protect against UV light, they are ready to use and don’t require painting.* This kit comprises of the parts shown below which are also available separately.
*Please note, does not include front fairing kit which can be ordered, code BPFS-1100. Graphics shown in photos are not included.
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS-250
If you have left and right exiting chambers (side by side) you will need to add 1 X exhaust stay to your order (Only one supplied in kit for twin right exiting chambers)
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need this fot the lower TYGA cowling.
TYGA no: BPFS-1102
SKU: apr-10068 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopRear Brake Light Switch Kit
€13.49
Rear Brake Light Switch Kit. Please specify the model you will be using this on because the spring length varies.
Note you will need to drill and tap a hole in the underside of the rear brake lever, if it has not already been done, in order to install this kit.
Dry clutch rebuild kit, Honda NSR250 MC21/MC28
€435.44
For those dry clutch motors which have had some tuning work, sometimes the stock components are not up to the task and clutch slip is a potential problem. To avoid this, the Tyga dry clutch kit will prevent such an occurrence. Extensively tested on our Tyga 300cc big bore engines it has proven its worth over and over again. This kit includes all parts needed to upgrade your clutch and get the power to the ground.
Honda OEM:
4x 22201-KV3-980
1x 22202-KV3-980
6x 22321-KV3-780
5x 22401-KV3-000
1x 91302-KV3-781
TYGA no: NHPS-0003
SKU: hon-10438 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopWiseco Piston, TYGA 300cc Big Bore Kit *
€227.29
The WISECO piston kit includes Piston, Rings, Wrist Pin and Circlips (2X) Use standard NSR250 Piston Bearing, 13111-KV3-771 (not included).
The WISECO pison offers great strength with light weight thanks to it’s forged design. And has a Zylan coated skirt for low friction.
This piston is a direct replacement for the ‘stock’ piston included in the TYGA 300cc big bore kit and gives greater scope for performance modifcation.
We offer this piston in two styles. Either shortened on the front side for the standard NSR250 crankcases, or full length for use in modified cases. Please add your choice of style to the comment box during checkout.
By default we will supply the shortened pistons.
Please contact us for instructions on modifying the cases for using full length skirted pistons
TYGA no: TPER-0026
SKU: hon-10882 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Step adjuster plate, NSR250 MC21/MC8
€86.53
Adjustable Footpeg Hanger Plate (Pair), MC21/28. These CNC machined plates are designed to take the stock Honda hanger plates allowing for three additional positions higher and further back over the stock position. See photos below for before and after with the middle position fitment. Also note fitment of the two bushes supplied for the left side due to the left hanger positions top and bottom not being in the same vertical plane.
Ideal for trackdays and those weekend ‘toe dragging’ hoons!
Positions: Back 20mm. Up 10mm, 20mm & 30mm
Includes all fitting hardware and extended link rod.
TYGA no: STAA-0018
SKU: hon-10367 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, ShopCarb Service Kit A, 16 pieces, Honda CBR250R MC14, MC17 & MC19
€37.58
Carb Service Kit A, 16 pieces, Honda CBR250R MC14, MC17 & MC19
LiteTek Carburettor Seal Kit to suit
Honda CBR250R MC14, MC17 & MC19
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-006 Float Bowl Ring, Material: Flourosilicone, ( Part of Honda Assembly Part No. [16010-KT7-003 or 16010-MN4-003] superseded by 16010-MN4-305)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A, ( Part of Honda Assembly Part No. [16010-KT7-003 or 16010-MN4-003] superseded by 16010-MN4-305)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A ( Part of Honda Assembly Part No. [16010-KT7-003 or 16010-MN4-003] superseded by 16010-MN4-305)
TYGA no: CKA-Honda-MC19
SKU: alg-10363 Categories: ALL products, Carburettor Service Kits,, CBR250R MC19, HondaBall, Steel #8, MC28SP
€0.73
Ball, Steel #8, MC28SP
TYGA no: 96211-08000
SKU: hon-11095 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Carb Service Kit A, 40 pieces, Honda RVF400 NC35
€81.81
Carb Service Kit A, 20 pieces, Honda RVF400 NC35
LiteTek Carburettor Seal Kit to suit: Honda RVF400 NC35
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-002 Float Bowl Ring, Material: Flourosilicone (Part of Honda Kit No. 16010-MR8-900)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MR8-900)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MR8-900)
4x OR-011 Needle O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MR8-900)
TYGA no: CK-Honda-NC35
SKU: alg-10351 Categories: ALL products, Carburettor Service Kits,, Honda, RVF400RR NC35, Shop, Various parts