Carb Service Kit A, 20 pieces, Honda CBR250RR MC22
€40.95
Carb Service Kit A, 20 pieces, Honda CBR250RR MC22
LiteTek Carburettor Seal Kit to suit
Honda CBR250RR MC22
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-012 Float Bowl Ring, Material: Flourosilicone, (Part of Honda Assembly Part No. 16010-KAZ-000)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-KAZ-000)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-KAZ-000)
4x OR-006 Needle O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-KAZ-000)
TYGA no: CKA-Honda-MC22
SKU: alg-10361 Categories: ALL products, Carburettor Service Kits,, CBR250RR MC22, HondaMount plate SC28 (92-93)meter stay, RC36-2 RC30 style
€14.46
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYLY-0317E-A
SKU: hon-11455 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, StocklistTank Protector, Carbon, NSR250 MC21
€120.42
Tank Protector, Carbon, NSR250 MC21
This real carbon protector is designed to fit snuggly on the NSR250 (MC21) fuel tank and will prevent scratches from zippers etc. It will also add some individual style to your pride and joy.
TYGA no: BPCX-0028
SKU: hon-11192 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21Meter Stay Extension
€12.29
Replacement meter stay extension nylon shaft. Suitable for the following models:
BPFS-0012
BPFS-0019
BPFS-0032
BPFS-0033
See table for application of meter stay extensions with our body kits:
Carbon race airbox lid, Honda NSR250 MC21/MC28
€210.89
The stock airbox is restricted by the size of the inlet holes on the lid which limits the amountof power that can be unleashed from the NSR250. By replacing the stock airbox lid with the TYGA Performance version, the inlet to the airbox is more than doubled in size and the flow improved by having one large trumpet.
This product is a direct replacement for the stock one and uses all the stock hardware. It even has an ‘O’ ring groove so by removal and re-use of the stock airbox lid ‘O’ ring, a perfect seal with the airbox can be retained. A mesh is supplied in the airbox to hold the stock air filter securely in position.
As well as potential power improvements over the stock airbox, there is no denying it certainly looks a lot more trick than the Honda one too!
TYGA no: BPCX-9010
SKU: hon-10323 Categories: ALL products, Carbon, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopLower Cowling (Carbon), NC30, GP-T, Assy.
€473.74
Lower Cowling (Carbon), NC30, GP-T, Assy.
This product is designed to be used with BPCU-9034 as part of the Bodywork set BPFS-0146
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also GRP version BPFL-9034.
Compatible products:
This product must be used with BPCU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.
TYGA bike dust cover Black/red Force V4 Honda wing
€76.13
TYGA Bike Dust Cover, Blue, Rothmans Honda
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0170
SKU: hon-11315 Categories: ALL products, Bike covers, By model, Honda, Merchandise, Shop, Universal parts, Various parts, VFR400RR NC30Stud, C, MC28
€2.59
Stud, C, MC28
TYGA no: 90033-KV3-830
SKU: hon-11132 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28