Set pipe Stainless full race system “round aluminium silencer”, Kawasaki ZXR400L
€827.77
Set, Pipe, Stainless, Full Race System, Round Aluminium Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. It uses a 450 mm long aluminium round silencer to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0139 and EXPS-0140 for similar system.
Undertray (Carbon), NC35 RC211V Assy.
€104.82
This is the Carbon undertray used in the NC35 RC211V style seat cowling kit BPFS-0018.
This product is suitable as a replacement in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.
To be used with
seat cowling BPFT-9018
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPCT-9020
SKU: hon-10767 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Seat set T9, CBR400RR
€207.80
This product consists of the seat cowling only. For a complete kit including undertray/rear fender tail light etc. select BPFS-0074
Triple clamp set CNC silver, NC35
€673.57
CNC machined TYGA triple clamp set for your RVF400 NC35.
These stylish, all aluminium triple clamps are a direct replacement for the notoriously easy to bend, OEM NC35 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0242
SKU: hon-10158 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, ShopFastener, Quick Long M, MC28
€18.13
Fastener, Quick Long M, MC28
TYGA no: 64512-KV3-830
SKU: hon-11138 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Clampingplate ram airbox, Honda RS250 NX5
€10.91
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0221A
SKU: hon-11381 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsCylnder, front brake assy, Honda NSR250
€259.56
Cylinder, Sub Assy, Front Brake, NSR250
Original OEM Honda Cylinder Sub Assy, Front Brake, fits NSR250 MC18/MC21/MC28
TYGA no: 45510-kv3-315
SKU: hon-10708 Categories: ALL products, Honda, Honda OEM products, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsExhaust set stainless steel, Honda NSR150
€346.46
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide, and we are now pleased to be able to offer their cylinder head for use on the NSR150SPThe VHM cylinder head is designed with removeable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (14.20cc)Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl