Carb Service Kit A, 36 pieces, Yamaha FZR400RR 3TJ1
€81.92
Carb Service Kit A, 36 pieces, Yamaha FZR400RR 3TJ1 & 3TJ32
LiteTek Carburettor Seal Kit to suit: Yamaha FZR400RR 3EN1 and 3EN2
Carburettor Model: Mikuni BDST 32
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-001 Float Bowl Seal, Material: Flourosilicone (OE part number: 3GM-14997-00)
4x JH-001 Jet Housing Seal, Material: Viton 70A (OE part number: 3LF-14147-00)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A ( Part of Yamaha Assembly: Part Number 12R-14105-00)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (OE part number:N/A)
4x OR-001 Top Cap O-Ring, Material: Viton 70A (OE part number: 3EN-14239-00)
4x SR-004 Main Jet Sq ring, Material: Viton70 A (OE part number: 1AE-14227-00)
4x OR-002 Float Mount O-Ring, Material: Viton 70A (OE part number: 3EN-14147-00)
4x OR-010 Pilot Merge Cavity O-Ring, Material: Viton 70A ( OE part number: N/A)
4x OR-018 Slide Housing O-Ring, Material: Viton 70A (OE part number: 1AE-14147-00)
Cover headlight upper cowling (pair) yellow, Honda VFR400 – RVF400
€27.34
Cover, (yellow), pair, Headlight, Upper Cowling, Endurance
To be used on the TYGA Endurance Fairings for NC30/35
TYGA no: SCRE-9011
SKU: hon-10644 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, VFR400RR NC30Carbon Seat set street GP-T, Honda RVF400 NC35
€1,913.80 €1,722.42
The ultimate seat set for your V4 Honda!
This modern seat cowling, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC35 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this seat cowlng set BPFS-0151 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0149
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0151
SKU: hon-10604 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Silencer stainless steel Motogp style (4 stroke) 54mm maggot
€228.20
Maggot silencer with 54 mm. inside inlet diameter. No mounting lug.Includes silencer clamp, mounting springs and spring hooks to weld onto existing exhaust tailpipe. Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application.
Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.
All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.
<a title= Maggot 54mm href= {{media url= wysiwyg/05-maggot-exsl-6013-54m-m-ebc7f34e.PDF }} target= _self >Clcik here for PDF</a> <iframe width= 560 height= 315 src= https://www.youtube.com/embed/hfUVXzAkxmM frameborder= 0 allowfullscreen></iframe>
TYGA no: EXSL-6013
SKU: alg-10115 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit MC22
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3308
SKU: hon-11266 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersSection, Header, Front Left, Stainless, VFR750F, 3rd Gen, 90-93
€122.86
TYGA no: EXPT-1151
SKU: hon-11346 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Carbon fairing stay side 87mm (pair), universal
€82.47
Fairing Stay, Side, Pair, Carbon, NSR250, GP-T, Assy.
Designed specifically for the NSR250 GP-T fairing, these side stays fit to the frame in the same position as the steel Honda stays. Made from lightweight carbon fiber with nylon bungs and ‘R’ clips, they are longer than stock and provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or similar application. See drawing for dimensions. Also see similar product BPSY-0144 Assy.
Dimensions:
BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.
BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.
Compatible products:
TYGA upper cowlings, BPFU-9033 and BPCU-9033.
TYGA no: BPSY-0144
SKU: hon-10537 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon race airbox MK1/MK2, Aprilia RS250
€451.00 €412.40
Carbon race airbox MK2, Aprilia RS250 (apr-10079)
Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.
And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( 53%).
The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)
Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.
The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.
All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.
Greater maximum power ( 3 hp *)
Better throttle response
Higher max. RPM ( 500 rpm)
A GP “sound”
Improved access for maintenance
Jets #310 – #320(*)
Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).
The filter is washable and gives better performance then original
The best aftermarket race airbox in the market, order with confidence.
* Standard engine
Please note, the rubber airbox manifolds are not with the airbox. You have the reuse the original ones.
TYGA no: 004800KT/P.
SKU: apr-10079 Categories: ALL products, Aprilia, Bodywork and carbon, High performance, High performance, RS250, Shop