Rear sprocket aluminium gold, Honda MSX125
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0302-33TG - TYSR-0302-37TG
SKU: MSX-10087 - MSX-10091 Categories: ALL products, By product, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Sprockets, Sprockets, SprocketsCarbon chain guard set, Honda CBR250RR MC22
€139.66
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCX-7210
SKU: hon-11464 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersRacing step kit CNC silver, Suzuki RGV 250 VJ21
€371.00
Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguards on both left and right hanger.
Exhaust mount rubbers and bushes from standard steps should be fitted to the TYGA steps.
Now includes rear brake light switch provision.
This step kit moves the peg position back 5 mm. and up 20 mm. from standard. Pitch of hanger frame mounting holes is 88 mm.
Perfect for street use, but also very handy on track. Because all parts from this race step are available separately.
Reverse schifting is possible with this race step kit.
TYGA no: STAA-0010
SKU: suz-10060 Categories: ALL products, CNC parts, RGV250 VJ21, Shop, Suzuki, Various partsSide fairing right RC211V, NC30 NC35
€110.40
This a replacement part for bodywork sets BPFS-0012* , BPFS-0013, BPFS-0014, BPFS-0032, BPFS-0033. This part renamed from BPFU-9118R
*fits later model BPFS-0012, earlier BPFS uses another parts. If in doubt email us first before ordering
TYGA no: BPFU-9120R
SKU: hon-10095 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Cover for exhaust outlet white , KTM RC390
€64.56
Cover, Exhaust Outlet, (GRP), KTM RC390, White
This cover fills the outlet hole left in the stock belly pan after installation of an under seat or similar exhaust. Easy to install, supplied with mounting hardware and painted white to blend in.
TYGA no: BPFC-7431W
SKU: ktm-10069 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Exhausts, KTM, RC 390, ShopAirbox "GRP", Honda NSR250 MC21/MC28
€423.04
Airbox, GRP, NSR250 MC21/MC28
This high quality GRP air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and GRP for light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank
See also BPCX-0007 for the same airbox in carbon/kevlar
*please do note some product photos are for reference and show the Carbon/Kevlar version fitted on our NSR250 project bike
TYGA no: BPFX-0007
SKU: hon-11070 Categories: ALL products, Bodywork and carbon, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Mikuni main jet # , Suzuki RGV250 /Aprilia RS250
€5.45
Mikuni main jet, Suzuki RGV250 / Aprilia RS250
Choose option below
TYGA no: alg-10106 - alg-10240
SKU: Mikuni 270 - 320 Categories: ALL products, Aprilia, By product, High performance, High performance, High performance, RGV250 VJ21, RGV250 VJ22, RS250, Suzuki, Various parts, Various parts, Various partsTriple clamp set CNC black RVF to fit NSR, NSR250 MC21
€698.63
Triple Clamp Set, CNC Black, NC35 Forks to fit MC21
CNC machined TYGA triple clamp set for the MC21 to take NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Front forks are not included and are shown in photos for reference only.
TYGA no: TYLY-1541
SKU: hon-10296 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, Shop