Set upper/meter stay Race, Kawasaki Ninja 400 2018-
€292.88
Set, Upper/Meter Stay, Race, Ninja 400
This lightweight all aluminium upper cowling/meter stay replaces the big and complicated heavy steel one supplied with the bike and weighs a fraction of the original.
It is designed to be strong but minimal and supports both the fairing and instrument securely. It consists of a CNC machined aluminium clamp around the headstock and a lightweight aluminium fabricated stay which has been powdercoated for a durable finish.
It is simple and easy to install and in the event of an accident, it is easy to replace or repair. The instruments are mounted using the original stock mounts and it has a tab for holding the tipover sensor, also includes a stay to relocate the regulator.
Please note this is for circuit use only and can be installed with TYGA Performance ( BPFS-0175) or other race bodywork.
TYGA no: TYLY-0216
SKU: kaw-10153 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Carbon engine covers left 2016 – , KTM Duke / RC390
€120.42
Engine Cover, (Carbon), Left, KTM Duke 250/390 RC250/390, 2016-2018 1
Engine Cover, (Carbon), Left, KTM Duke 250/390 RC250/390, 2016-2018 2Engine Cover, (Carbon), Left, KTM Duke 250/390 RC250/390, 2016-2018 3
Engine Cover, (Carbon), Left, KTM Duke 250/390 RC250/390, 2016-2018
This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Note: This product does not fit the 2014-2015 model KTM RC390 due to a revised design of the left side engine cover, please see BPCC-7331L for 2016-2018 type
TYGA no: BPCC-7531L
SKU: ktm-10080 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Duke 390 2017 -, KTM, RC 390, RC390 2022-Seat cowling GRP single “Race”, RC36-2 RC30 style
€363.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFT-7149
SKU: hon-11476 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSeat Cowling, Top, Street, (Carbon), Cup Style, KTM RC125, RC200. RC250, RC390
€361.17
Seat Cowling, Top, Street, (Carbon), Cup Style, KTM RC125, RC200. RC250, RC390
This is a replacement part for set BPFS-0142. Please note that the following parts are required to complete the set:
BPCT-7331A Seat Cowling, Top
BPCT-7331B Undertray
BPSP-0007 Seat Pad
TYGA no: BPCT-7331A
SKU: ktm-10114 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 3902T blank plug, NSR250
€7.37
Replaces the 2T oil injector pump for pre mix use. Secure with liquid gasket such as Three Bond 1104. Must be used with TYLY-0015 Plug holder
Note for blocking the extra 2T feed on later model oil pumps.
On later engines (some MC21 and all MC28, there is an extra oil feed to the cases which can be observed when the oil pump is removed. HRC used to supply a little aluminium plug that you knocked into this extra hole to blank it off. However, that is discontinued so what to do depends on whether the conversion to pre-mix is permanent or not.
If permanant, then we recommend you make sure it’s all clean and degreased, and then fill the hole with epoxy steel. Allow it to cure and it’ll never leak.
If you’re not sure if you’ll ever go back to the oil pump, but would like the option, then we suggest covering the hole with a small thin disc of steel or plastic, and then using a RTV sealant to sort of glue that in place and also block it off. The RTV will stop any leaks, and the small disc will stop any RTV going down the hole. This is then soft enough to be cut away at a later date should you need to.
Compatible products:
TYLY-0015 Plug holder
TYGA no: TYLY-0012
SKU: hon-10388 Categories: ALL products, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsComplete fairing set T9, Honda CBR400RR
€775.32
This set of bodywork comprises of the parts shown below which are also available separately
This kit is supplied with all additional fasteners required to mount it to a stock NC23. It fits to the original meter and supplied with a mirror stay. It uses the Honda mounting points and fasteners for mirrors. Where it mounts to the lower cowling and frame, it uses the original Honda bolts and clips (not supplied)
DB-killer for stainless exhaust 2 inch
€28.57
Decibel Killer, Silencer, Stainless, 2 Inch
This decibel killer is designed to reduce the noise from TYGA exhausts with 2 inch tail pipes. Suitable for the following models:
EXSL-0017 SUS Oval
EXSL-0040 Silencer, Aluminium, Round, 2 x 380 mm.
EXSL-0047 Silencer, Aluminium, Round, 2 x 450 mm.
It will also physically fit the following silencers, but it should not be used with any carbon silencer due to extreme heat buildup. If you like the designs below and would like the DB killer then please request that the silencer be made with stainless steel sleeve instead of carbon. We will advise on price (Stainles version of silencers below inclusive of db killer included will be less expensive than the carbon version excluding the db killer)
EXSL-0012
EXSL-0016
EXSL-0022
EXSL-0023
TYGA no: EXDK-0003
SKU: alg-10226 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Racing stepkit black/RED adjustable, Honda MSX125 GROM
€477.27 €395.87
Racing Rear Set Kit, Adjustable, black with Red Slot Cover, MSX125 Grom
With all major components desgined specifically for the MSX125 Grom in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items. Be sure to order the correct colour combination. Some photos below are for reference and show different colours to this product.
Note, no real brake light provision. If required, we recommend installation of inline pressure switch.
<a href= {{media url= wysiwyg/05-fitting-msx-step-kit-online-6e1bce74.pdf }} target= _self >Click here for fitting instructions</a>
You can only use these steps on the MSX125SF if you have a TYGA high level exhaust
TYGA no: STAA-1019RED
SKU: MSX-10238 Categories: ALL products, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, Shop, Steps, Steps