Top end rebuild set Cylinder A, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘A’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston B mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001A
SKU: hon-10439 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon cover, rev. Counter 91,5mm, Honda
€32.14
Carbon cover, rev. Counter 91,5mm, Honda
This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.
This product is suitable for the following models:
MC21 NSR250
MC22 CBR250RR
NC29 CBR400RR
NC35 RVF400
SC28 CBR900RR
Also available as a complete set with Carbon speedo, temp gauge and rev counter covers, see BPCC-0028
This product might also fit other models.
TYGA no: BPCC-0023
SKU: hon-10611 Categories: ALL products, Carbon, CBR250RR MC22, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various partsCover Seat CNT, Black, Ninja 250R/300R 2013 -18
€32.88
Cover Seat CNT, Black, Ninja 250R/300R 2013 -18
TYGA no: 53065-0062-H8
SKU: kaw-10174 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopFuel Tank, GRP “painted OEM, HONDA VFR750R RC30
€1,481.44
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
TYGA no: BPFG-007blue/white
SKU: hon-11368 Categories: ALL products, Bodywork, Honda, Shop, VFR750R RC30Tuning set CNC silver GROM
€62.96
Tuning set CNC silver GROM (msx-10158)
A set contains:
2x clutch – brake mount clamp
1x Brake reservoir cap
1x Clutch adjuster
TYGA no: special012
SKU: MSX-10158 Categories: ALL products, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsExhaust section, stainless steel, Honda MSX125 GROM
€103.66
Section to be used with Moto Maggot EXSL-8013 as part of system EXPS-0034
TYGA no: EXPT-0034
SKU: MSX-10003 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, ShopSeal, Gear Change Shaft, MC28
€8.00
Seal, Gear Change Shaft, MC28
TYGA no: 91202-444-023
SKU: hon-11115 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Tyga Step Kit Replacement Right Side Hanger, MC28, Assy.
€58.39
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts and bushes.
TYGA no: STAH-0002B
SKU: hon-10800 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28