Meter stay, standard VFR400 NC30
€66.48
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: TYLY-0289
SKU: hon-11309 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30VHM piston (14mm piston pin) RS125 NF4 1987-’94 – RS250 NF5 1987-’92
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521717
SKU: alg-10401 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsFront Fork Preload Adjusters blue/red (Pair), Honda MSX125 GROM
€172.49
Front Fork Preload Adjusters, Pair, MSX125 Grom, Red/Blue
These fully functional preload adjusters replace the blank end caps on the stock MSX125 Grom front suspension. It is generally acknowledged that the MSX125 is a bit soft on the front and these caps allow the rider to increase (or reduce) the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
These adjusters allow you and extra 6mm of preload from standard.
Supplied in red and blue anodised finish, (see TYLY-1097 and TYLY-2097 for other colour versions too) these adjusters are as beautiful as they are functional.
TYGA no: TYLY-0097
SKU: MSX-10137 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various partsCarbon lower cowling GP-T, Honda NSR250 MC21/MC28
€509.98
Lower Cowling (Carbon), NSR250 GP-T, Assy.
This product is designed to be used with BPCU-9033 as part of the Bodywork set BPFS-0138
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. Also available in GRP, see BPFL-9033
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPCU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPCL-9033
SKU: hon-10541 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopRacing stepkit black/GOLD adjustable, Honda Monkey 2018
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Black, Monkey 125
With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.
Notes:
No real brake light provision. If required, we recommend installation of inline pressure switch.
Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included
This rear set cannot be used in a reverse (GP) shift pattern
TYGA no: STAA-1027GOLD
SKU: msx-10419 Categories: ALL products, CNC parts, Honda, Monkey 125 2018-, ShopWater pump shaft/gear, Honda NSR250 MC28
€255.37
Water Pump Shaft/Gear, MC28
High quality hard anodized aluminium gear, on precision ground shaft.
Manufactured by T2 Racing in Japan.
Direct replacement for the standard plastic shaft/gear which is prone to cracking and causing catastrophic failure.
The shaft and gear can be disassembled should any parts ever need replacing.
Note that this part is for MC28 only. For MC18 and MC21 please see TPER-5003
TYGA no: TPER-5004
SKU: hon-10623 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various partsFront fork adjuster 14mm
€32.91
Front fork Pre-load adjuster. suitable for adjuster with 14 mm oval type fitment, for example:
Make Model from year to year
Honda NSR250 1988 1997
Honda VFR400R 1989 1993
Honda CB 1300 2003 2009
Honda CB 1300 S 2005 2013
Honda CBR 600 F 2001 2007
Honda CBR 600 F Sport 2001 2002
Honda CBR 600 RR 2003 2004
Honda CBR 900 RR Fireblade 1992 1999
Honda Hornet 900 2002 2005
Honda VTR 1000 F Firestorm 1997 2006
Suzuki GSX-R 600 1997 2003
Triumph Daytona 1200 1993 1997
Triumph Daytona 900 1993 1996
Triumph Daytona 955i 1999 2006
Triumph Daytona T595 (955i) 1997 1998
Triumph Speed Triple 2003 2004
Triumph TT 600 2000 2003
TYGA no: TYLY-1110 - TYLY-4110
SKU: alg-10149 - alg-10151 Categories: ALL products, CBR600RR 2003- 4, CBR900RR 1992- 95, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Rear sprocket aluminium gold, Aprilia RS250
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0106-38T -TYSR-0106-44T
SKU: apr-10050 - apr-10056 Categories: ALL products, Aprilia, By product, RS250, Sprockets, Sprockets