Section, Pipe, Stainless, CBR150
€148.12
CBR150 Pipe. Silencer not included.
Carbon holder brake hose "NSR500V style), NSR250 MC28 – NC30 – NC35
€45.78
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPCC-0051
SKU: hon-11203 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC28, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Tyga Step Kit Replacement Left Side Hanger, MC18 Assy.
€76.20
Replacement left hanger for your MC18 TYGA Step Kit. Complete with mounting bolts and bushes.
TYGA no: STAH-0023
SKU: hon-10875 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsIndicator, Rear, Right, Ninja 250R 2008 -12
€35.39
Indicator, Rear, Right, Ninja 250R 2008 -12
TYGA no: 23037-0118
SKU: kaw-10218 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopGasket cylinder 0,4 NF5
€12.29
Gasket, Cylinder, 0.4mm NF5
Fits MC16~28. Use to adjust deck height/squish/compression ratio.
TYGA no: 12191-NF5-610
SKU: hon-10413 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopTyga Step Kit Replacement Left Side Hanger, (Adj.) CBR250R/CBR300R Assy.
€65.91
Tyga Step Kit Replacement Left Side Hanger, (Adj.) CBR250R/CBR300R Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts. Note this is for the adjustable type. See STAH-0017 for non adjustable fixed type.
Triple clamp set CNC black, Honda NSR250 MC18/MC21
€673.57
CNC machined TYGA triple clamp set for your NSR250 MC21.
These stylish, all aluminium triple clamps are a direct replacement for the MC21 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1241Â
SKU: hon-10265 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopLower cowling stock shape right, CBR250RR MC22
€108.39
Exact copy of right side of stock MC22 shape lower to be used either with stock shape or Tyga RC211V style bodywork.