Carbon seat cowling, RD250/350LC (4L1/4L0)
€207.19
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
NGK plugcab for sparkplug R7282 Blue
€67.95
NGK sparkplug cab for sparkplug R7282 Blue (alg-10228)
NGK spark plug cap TRS1225 with 5 kohm resistor for NGK short race spark plug R7282. Suitable for 8 mm spark plug cable. Can be used f.e. for Honda NSR250 / RS and Aprilia RS250 / Suzuku RGV250 Yamaha TZ 125 and 250 road race engines.
You also need product alg-10227, picture below is a complete set.
TYGA no: TRS1225
SKU: alg-10228 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RS250, ShopTop End Rebuild Kit MC18, Cyl. B, Assy.
€293.88
Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘B’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0002B
SKU: hon-10837 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC18Passenger seat cover GRP, Honda VFR750F 4th gen (94-97)
€102.28
Racing Step Kit, Honda VFR750, Gen4 (1994-1997)
TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance, these CNC machined step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners and all the required hardware.
Includes rear brake light provision, and retains the standard exhaust guard.
Carbon heel guards are included for both left and right hangers.
Peg position is 10 mm. up and 10 mm. back. Pitch of hanger to frame mounting holes is 78.6 mm.
TYGA no: BPFX-7149
SKU: hon-11360 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR750F Gen 4, 94-97Tube, air/cleaner connect
€33.24
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 17253-kv3-950
SKU: hon-11316 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, ShopBreather cap, aluminium CNC, Honda RC30/NC30/MC18
€35.12
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
TYGA no: TPER-0112
SKU: hon-11446 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC18, RC36-2 -> RC30 replica products, Shop, Stocklist, Various parts, Various parts, VFR400RR NC30, VFR750R RC30Washer, RC Valve, Special, MC28
€5.68
Washer, RC Valve, Special, MC28
TYGA no: 90555-KV3-000
SKU: hon-11124 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28VHM Cyl. Headset Husqvarna TC125 ’14 –
€271.95 €256.04
VHM Cyl. Headset Husqvarna TC125 ’14 -> (alg-10215) AA33097VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.60cc)Optional inserts:– blind– 11.20– 11.40– 11.80– 12.00This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33097.
SKU: alg-10215 Categories: ALL products, Husqvarna MX, Motocross, Shop, VHM products