Carbon rear hugger, KTM RC125/RC200/RC390 2022-
€113.63
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCH-7031B
SKU: ktm-10206 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsSeal, Headstock Lower
€25.62
Seal, Headstock Lower
TYGA no: 53214-371-010
SKU: hon-11142 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Handlebar Clamp, Left, Black, 50 mm.
€98.58
Handlebar Clamp, Left, Black, 50 mm.
Replacement handlebar clamp for handle bar set TYLY-1078
Top Triple clamp CNC black , Suzuki RGV 250 VJ22kit
€257.32
CNC machined top triple clamp with detachable ignition switch/lock holder for your RGV250 VJ22.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-1046
SKU: suz-10054 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiSet pipe Full race system WSS300 (street), KTM RC390
€1,155.39
Set, Pipe, Full Race System, WSS300, (Street) KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0111
SKU: ktm-10146 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsBracket rear brake, 84mm Brembo conversion Silver, Honda MSX125 GROM
€100.41
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, MSX125 Grom
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1093)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-0093
SKU: MSX-10079 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopCarbon frame cover, Aprilia RS250 MK1 / MK2
€326.68
Carbon fuel tank MK1, Aprilia RS250
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave.
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
TYGA no: OO1501KP/TYGA
SKU: apr-10103 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopCarbon front fender stock shape , Honda NSR125 JC22
€165.87
Real Carbon fibre reproduction of the stock OEM Honda front fender. Finished in high gloss, adds beauty and reduces unsprung weight. (weight of part approx. 0.2 kg)
TYGA no: BPCF-7035
SKU: hon-10479 Categories: ALL products, Carbon, Honda, NSR125 JC22 1994 - 2003, Shop