Carbon fuel tank (early type), Honda RS250R NX5
€1,444.49
Fuel Tank, Carbon, RS250R NX5 (Early Type)
Top quality reproduction of the early non ram air version NX5 fuel tank in carbon fiber.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel, Avgas 100LL to E85 (85% ethanol). Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light ( 2.25 kg) Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts and following the stock shape, the following stock parts can be used (not included):
Fuel Cock
Breather
Front strap
Stock mounting rubbers
Filler cap and seal
IMPORTANT: Please note that this fuel tank, for ease of manufacture, uses the later flush fitting NX5 type filler cap. This can be purchased from HRC (part numbers 17521-NX4-680 for filler cap and 17515-NX5-770 for seal) or we can supply our own TYGA version (Cap: TYLY-0178A, Seal: BPSY-0238) Note the filler cap and the above list of parts are not included with the fuel tank and needs to be purchased separately.
TYGA no: BPCG-0003
SKU: hon-10946 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopTuning set CNC silver GROM
€62.96
Tuning set CNC silver GROM (msx-10158)
A set contains:
2x clutch – brake mount clamp
1x Brake reservoir cap
1x Clutch adjuster
TYGA no: special012
SKU: MSX-10158 Categories: ALL products, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsCarbon rear hugger/chain guard, Kawasaki Ninja 400 2018-
€250.83
Rear Hugger/Chain Guard (Carbon), Ninja 400 (2018-)
This rear hugger/chain guard replaces the nasty plastic item, adds class to your ride and is an easy installation.
TYGA no: BPCH-7040
SKU: kaw-10148 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-VHM cylinder head (2 pieces), Yamaha TZ250 1995 ’02
€574.90 €512.20
VHM cylinder head (2 pieces), Yamaha TZ250 <’02 (alg-10170)VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:2x cylinder head2x standard insert (12.0cc)This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Exhaustset stainless steel carbon silencer round, Kawasaki ZXR250
€639.76
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round carbon silencer EXSL-0032
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.P Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifold<iframe width="560" height="315" src="https://www.youtube.com/embed/z5hGKrpQ56c" frameborder="0" allowfullscreen></iframe>
TYGA no: EXPS-0015Â
SKU: kaw-10017 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopCartridge glas wool, TYGA 2 stroke silencer
€10.81
This is a replacement glasswool cartridge ideal for repacking Tyga or other similar sized two stroke silencers.
Easy to install, clean and long lasting. Overall length 290 mm. X 58 mm. diameter
TYGA no: EXGL-0001
SKU: alg-10245 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, ShopLower cowling, Aprilia RS250 Tyga, assy
€234.42
This lower cowling is suitable for our Aprilia RS-250 kits, BPFS-0100 and BPFS-0101.
This product is compatible with upper cowling BPFU-9030 and BPFU-9130. Will not fit stock Aprilia upper cowling
TYGA no: BPFL-9030Â
SKU: apr-10044 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopFairing set street T13, Honda RVF400 NC35
€982.48
Newly introduced for 2013, the T13 body kit has been designed to be both contemporary and stylish and provide an updated alternative to our popular RC211V kits. The GRP panels this kit uses are made from high quality epoxy resin which is both light and flexible. We also make the same kit but extensive use of carbon fiber, see BPFS-0116.
This set of bodywork requires modification of the NC35 including a tank cover, a meter stay and all the other components listed below which are also available separately.
*A clear screen is provided unless you specify tinted in the comment box at check out.
Please note some photos show the carbon version of this kit. The shape is identical to this kit.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0115
SKU: hon-10314 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop